Jump to content





Roland MT-200: How to configure, install, and use a GoTEK Floppy Emulator

Posted by -^CrožBow^-, 13 March 2018 · 250 views

As some might know by now, I've got an MT-200 that I picked up over a month ago now. Really cool little device from Roland that was originally intended for use in teaching music. But these devices have the ability to play back midi files through built in disk drives that use IBM formatted 3.5 inch disks. They can also be used as sound modules and with modern day computers can still be made to be used with ScummVM and Dosbox for classic gaming. Anyway I was getting frustrated with my disks seeming to work one day and then a week later suddenly given me read errors. So I read up on using one of these cheap Gotek floppy emulators into mine. But information on actually making one work with my MT-200 wasn't to be found. I did find Gotek's pre-configured to work with devices like my Roland MT-200 and its variants on eBay, but at $80 + shipping that seemed crazy to me. So I bought a generic Gotek with the intention of figuring out how to make it work in my Roland MT-200.
 
I was quite successful and it turned out to be MUCH easier than I thought it would be. I did a video last week on the process of which jumpers are needed, the installation, and the software I found to make it all work in my Roland MT-200. I now share this knowledge in my recently released YT video so that you don't have to pay those crazy prices on eBay either and can hopefully find this useful: