vectrexroli Posted July 14, 2017 Share Posted July 14, 2017 Got my FinalGROM 99 today and that thing is just mind blowing! Also that ZIP file on WHTech was super helful, now it is just plug & play. Took me a while to find a SD card that works 100%, with all my Sandsik SDHC 32GB cards I got a blinking LED when powering up, even after a reset everything seems to work fine. Found an old Lexar SDHC 4GB card and that one works fine. BTW the Jetpack ROM image from WHTech did not work on my setup. Not sure if it is the image or something else. 6 Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted July 14, 2017 Share Posted July 14, 2017 (edited) Yeah, I've found that the cheapo class 4 SD cards from China have always worked for me on my FlashROM and the FinalGROM. They are easily obtainable << HERE >> on eBay. The only problem I've found is that you sometimes have to wait up to three weeks for delivery. But hey, if you just ordered a FG99, hop on eBay NOW because if you live in the US you may get a ten day customs hold on your FG99, so both things may arrive close together. After you click << ON THE LINK >> you can select the 1GB version (currently for only $2.53 each) delivered to your mailbox. I mean, really, do you need more than 1GB on your TI? Edited July 14, 2017 by --- Ω --- Quote Link to comment Share on other sites More sharing options...
brain Posted July 14, 2017 Share Posted July 14, 2017 Got my FinalGROM 99 today and that thing is just mind blowing! Also that ZIP file on WHTech was super helful, now it is just plug & play. Took me a while to find a SD card that works 100%, with all my Sandsik SDHC 32GB cards I got a blinking LED when powering up, even after a reset everything seems to work fine. Found an old Lexar SDHC 4GB card and that one works fine. BTW the Jetpack ROM image from WHTech did not work on my setup. Not sure if it is the image or something else. Hmm, there are two possible issues: One, check your larger card in a Windows system to see if the card is formatted exFAT. If it is, reformat it to FAT32 and it should work. Due to copyright and patent encumbrances, I know of no open source exFAT code. If not, then I'll see if I can grab Ralph's source tree and see what FAT library he is using. I wholeheartedly recommend FatFS, as it's lean, works impressively well, and is open source. Jim 1 Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted July 14, 2017 Share Posted July 14, 2017 Cases are being made by the guy in Spain that makes the flashrom and nanopeb cases Sent from my LG-H830 using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
c0d3m4st4 Posted July 14, 2017 Share Posted July 14, 2017 Cases are being made by the guy in Spain that makes the flashrom and nanopeb cases Sent from my LG-H830 using Tapatalk That's me! Anyone interested, keep an eye on my marketplace thread in my signature. 4 Quote Link to comment Share on other sites More sharing options...
ralphb Posted July 15, 2017 Author Share Posted July 15, 2017 One, check your larger card in a Windows system to see if the card is formatted exFAT. If it is, reformat it to FAT32 and it should work. Due to copyright and patent encumbrances, I know of no open source exFAT code. If not, then I'll see if I can grab Ralph's source tree and see what FAT library he is using. I wholeheartedly recommend FatFS, as it's lean, works impressively well, and is open source. I use the Petit FatFS. But Roland's problem is that some SD card won't work when powering up, but they do after a reset. Maybe they don't initialize fast enough, or the power is still too low during initialization? If we get more reports, I can have a look at this. 1 Quote Link to comment Share on other sites More sharing options...
Sinphaltimus Posted July 15, 2017 Share Posted July 15, 2017 I have a question about the FG and FR. Can I share an SD card between the two?If I keep FR files in the root and FG files in a folder?I just searched through my collection of SD and Micro SD cards to discover they are all currently allocated to something. Don't feel like ordering a new SD just yet as I maybe able to free one up soon (make a backup) but not yet. Perhaps before the FG arrives but curious anyway. Quote Link to comment Share on other sites More sharing options...
ralphb Posted July 15, 2017 Author Share Posted July 15, 2017 (edited) Can I share an SD card between the two? Theoretically, yes. The FlashROM 99 didn't have any filename restrictions, though, so some FlashROM 99 programs may be missing (short filename ending in D) or not working (short filename ending in G) when used in the FinalGROM 99. The details are in the "Filenames" section of the homepage, which sounds more complicated that it is. The other way around will list GROM images, but the FlashROM 99 will think they're ROM images. To avoid confusion, I'd would not mix them personally, but it works if you know what you're doing. Edited July 15, 2017 by ralphb 2 Quote Link to comment Share on other sites More sharing options...
dphirschler Posted July 15, 2017 Share Posted July 15, 2017 (edited) I want this one: I am assuming that is this one: "[ ] assembled FinalGROM 99 board, buttons and LED soldered €45" Correct? Just want to be sure. I want the LED and SMD buttons already on the board. Will it fit in a TI cart shell like that? I want to glue a clear lens in the hole I drill in the top of cart shell. And I will 3D print some buttons that press the SMD buttons down. Darryl Edited July 15, 2017 by dphirschler Quote Link to comment Share on other sites More sharing options...
x24b Posted July 15, 2017 Share Posted July 15, 2017 Happy to say a FinalGROM 99 is enroute to my house. Thanks Ralph! 1 Quote Link to comment Share on other sites More sharing options...
Sinphaltimus Posted July 15, 2017 Share Posted July 15, 2017 (edited) And I will 3D print some buttons that press the SMD buttons down. I have googled far and wide for a push button that would do this and came up empty. I don't think I know its proper name. I'd be interested in seeing your 3d printed one in action. EDIT: Found them, "Spring Loaded Push Pins" Edited July 15, 2017 by Sinphaltimus Quote Link to comment Share on other sites More sharing options...
ralphb Posted July 16, 2017 Author Share Posted July 16, 2017 I am assuming that is this one: "[ ] assembled FinalGROM 99 board, buttons and LED soldered €45" Correct? Just want to be sure. I want the LED and SMD buttons already on the board. Will it fit in a TI cart shell like that? I want to glue a clear lens in the hole I drill in the top of cart shell. And I will 3D print some buttons that press the SMD buttons down. Yes, that's the one. This one can, of course, also be mount in a shell, but you'd have to make sure to see the LED somehow, and to push the buttons by some contraption. And just to clarify the mounting in a shell: At the very least, you have to add a slit for the SD socket, and cut down one little "finger" inside the shell. For both you can use a rasp. For LED and buttons, you'll need holes. Quote Link to comment Share on other sites More sharing options...
Sincity Posted July 17, 2017 Share Posted July 17, 2017 Send an email to r@0x01.de with what you want You can order An assembled FinalGROM for $51.29 An assembled FinalGROM without LEDs or buttons for $51.29 The FinalGROM label for $1.14 Shipping for $11.40 Thanks. I still have the original version in kit form still unassembled because Ralph couldn't make them fast enough when they were first introduced. Quote Link to comment Share on other sites More sharing options...
vectrexroli Posted July 17, 2017 Share Posted July 17, 2017 So there is also a label available for the FinalGROM? Quote Link to comment Share on other sites More sharing options...
+chue Posted July 17, 2017 Share Posted July 17, 2017 So there is also a label available for the FinalGROM? Yes. From the FinalGROM homepage (https://endlos99.github.io/finalgrom99/): Please fill out and include this snippet in your inquiry: Amount[ ] assembled FinalGROM 99 board, buttons and LED soldered €45[ ] assembled FinalGROM 99 board, without buttons and LED €45[ ] FinalGROM 99 laminated cartridge label € 1 world-wide shipping for up to two carts €10 1 Quote Link to comment Share on other sites More sharing options...
kl99 Posted July 19, 2017 Share Posted July 19, 2017 I informed retrorgb about your product, he has a matching target audience and usually around 3500 views on his videos. starting from 07:50 minBR Klaus 3 Quote Link to comment Share on other sites More sharing options...
ralphb Posted July 19, 2017 Author Share Posted July 19, 2017 I informed retrorgb about your product, he has a matching target audience and usually around 3500 views on his videos. Thanks, Klaus! Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted July 19, 2017 Share Posted July 19, 2017 delivered! now just have to leave work and go get them! Greg 2 Quote Link to comment Share on other sites More sharing options...
Casey Posted July 19, 2017 Share Posted July 19, 2017 Guess what came in the mail today! My plan is to stick this in a beige cart shell, but I need suggestions on where to obtain the buttons and the LED to solder onto it. What are others using? Thanks! 1 Quote Link to comment Share on other sites More sharing options...
Shift838 Posted July 19, 2017 Share Posted July 19, 2017 (edited) Guess what came in the mail today! My plan is to stick this in a beige cart shell, but I need suggestions on where to obtain the buttons and the LED to solder onto it. What are others using? Thanks! Standard 5mm red LED. I have been emailing Ralph about the buttons to make sure, they are standard Normally Open tactile switches. So any Normally Open Momentary push button will work. You will only need to worry about 2 pins on each button of course. Reference the attached screenshot for the FG99 Reset. the two yellow arrows in the diagram is how the connetions of the button should be made. Of course you can use either set on the button. Same with the TI99 Reset switch. just 2 out of the 4 are required. the vertical pins (from back of board to front) are the ones that need to be connected to the switches. Edited July 19, 2017 by Shift838 Quote Link to comment Share on other sites More sharing options...
Casey Posted July 19, 2017 Share Posted July 19, 2017 I'd like to do something just like this: https://raw.githubusercontent.com/endlos99/finalgrom99/master/doc/cartshell.jpg I suppose I could just email Ralph and asking him what he used for the buttons Quote Link to comment Share on other sites More sharing options...
+Vorticon Posted July 20, 2017 Share Posted July 20, 2017 BTW the Jetpack ROM image from WHTech did not work on my setup. Not sure if it is the image or something else. Jetpac is a 64K ROM because it includes the full Turbo Forth environment. Not sure if the Finalgrom-99 supports ROM images greater than 32K... Quote Link to comment Share on other sites More sharing options...
+Lee Stewart Posted July 20, 2017 Share Posted July 20, 2017 Jetpac is a 64K ROM because it includes the full Turbo Forth environment. Not sure if the Finalgrom-99 supports ROM images greater than 32K... It supports ROM images up to 1 MiB! ...lee 2 Quote Link to comment Share on other sites More sharing options...
eightbit Posted July 20, 2017 Share Posted July 20, 2017 Just paid Ralph for mine...a little late to the game But I am excited Quote Link to comment Share on other sites More sharing options...
ralphb Posted July 20, 2017 Author Share Posted July 20, 2017 I suppose I could just email Ralph and asking him what he used for the buttons Sure you could. I used this button, although I could swear I paid more then €5 each. Anyway, they're quite expensive, but they're also the shortest buttons that are flush to the mounted surface I could find here. The manufacturer is APEM, the part number is IBR3SAD600. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.