ACML Posted September 30, 2017 Share Posted September 30, 2017 IMG_3615.JPG ClausB here is a HDR picture of the motherboard. Sorry but I'm not the best photographer. I can try to take better pictures at a point where I have some more time. Wow! Looks like it has hand soldered. Very nice piece of Atari history. Quote Link to comment Share on other sites More sharing options...
ClausB Posted October 1, 2017 Share Posted October 1, 2017 Also interesting is there are only 2 ROM sockets, so this was designed before the need for the Math ROM. Shame the 2 OS ROMs aren't there. The LSTTL chips at left are not the same as in production 400s. There is no LS42 for decoding the address space into 8K blocks. Rather the single LS138 decodes it into 4K blocks, but only 8 of them. My early 800 has 2 LS138s for 16 4K blocks. This incomplete decoding in the early 400 is diagrammed on page 73 of DeCuir's 1978 notebook. It limits this 400 to at most 12K of RAM. 4 Quote Link to comment Share on other sites More sharing options...
+slx Posted October 1, 2017 Share Posted October 1, 2017 This incomplete decoding in the early 400 is diagrammed on page 73 of DeCuir's 1978 notebook. It limits this 400 to at most 12K of RAM. The level of detail of some people's knowledge never ceases to amaze! Good decision by Atari to upgrade this to allow at least 48K of RAM. 3 Quote Link to comment Share on other sites More sharing options...
JamesD Posted October 1, 2017 Share Posted October 1, 2017 12K is little more than a game console would need. Quote Link to comment Share on other sites More sharing options...
ClausB Posted October 2, 2017 Share Posted October 2, 2017 (edited) Page 73 of Decuir's 1978 notebook (https://archive.org/details/JoeDecuirEngineeringNotebook1978) shows the memory map resulting from the incomplete decoding. Each 4K block is mirrored twice within the 6502's 64K address space: Page 88 shows the actual decoding circuit. Notice A15 is missing. This technique saves a chip: Edited October 2, 2017 by ClausB 3 Quote Link to comment Share on other sites More sharing options...
JamesD Posted October 2, 2017 Share Posted October 2, 2017 It makes you wonder if they were designing it as more of a game console, or introductory computer. Quote Link to comment Share on other sites More sharing options...
ClausB Posted October 2, 2017 Share Posted October 2, 2017 Flip through that notebook. Lots of notes, not only technical, but also meeting results, questions and decisions. Even focus group results, showing little interest in pure gaming. Quote Link to comment Share on other sites More sharing options...
jacobus Posted October 4, 2017 Share Posted October 4, 2017 Thanks very much for sharing, that is an amazing bit of history! I had to laugh at Curt's initial reaction of "Mine! Gimme!" Priceless! 6 Quote Link to comment Share on other sites More sharing options...
Tempest Posted October 4, 2017 Share Posted October 4, 2017 I had to laugh at Curt's initial reaction of "Mine! Gimme!" Priceless! Well there was a good reason for that. Interesting that there are two 'one of a kind' prototypes now though. Quote Link to comment Share on other sites More sharing options...
+mytek Posted October 4, 2017 Share Posted October 4, 2017 I had to laugh at Curt's initial reaction of "Mine! Gimme!" Priceless! I also got a kick out of that as well. So now we know that Curt still watches these forum's, even though he rarely makes his presence known. And that all we have to do to get him to reveal himself is dangle a piece of something he once had possession of. - Michael 3 Quote Link to comment Share on other sites More sharing options...
atarikid1968 Posted October 4, 2017 Author Share Posted October 4, 2017 Tempest, there isn't "two" one of a kind prototypes for the 400. What Curt was talking about is that Doug also had the first "Stella" (2600 of course) in his possession. He had the 2600 and 400 but unfortunately Doug believed in a video store owner and let him borrow it as a display and never received it back. I'm currently trying to track down the store owner to see if I can retrieve it. I'm so blown away with the knowledge and passion of everyone on here and I'm just disappointed that I didn't know about this before Doug passed away; he would have loved this site. I'd still like to upload some of Doug's audio recordings talking about how and why they designed things the way they did. Plus his description of how things were done at Atari is just the best. 11 Quote Link to comment Share on other sites More sharing options...
+Stephen Posted October 4, 2017 Share Posted October 4, 2017 Tempest, there isn't "two" one of a kind prototypes for the 400. What Curt was talking about is that Doug also had the first "Stella" (2600 of course) in his possession. He had the 2600 and 400 but unfortunately Doug believed in a video store owner and let him borrow it as a display and never received it back. I'm currently trying to track down the store owner to see if I can retrieve it. I'm so blown away with the knowledge and passion of everyone on here and I'm just disappointed that I didn't know about this before Doug passed away; he would have loved this site. I'd still like to upload some of Doug's audio recordings talking about how and why they designed things the way they did. Plus his description of how things were done at Atari is just the best. Please do so - this information is absolutely priceless. 3 Quote Link to comment Share on other sites More sharing options...
Bryan Posted October 5, 2017 Share Posted October 5, 2017 I'm so blown away with the knowledge and passion of everyone on here and I'm just disappointed that I didn't know about this before Doug passed away; he would have loved this site. We would have loved it if he had been on here. Today there's a million similar technology products in development at any one time, but back in the '70s there were so many instances where things were being done for the first time by a very small team who had no real road map of how to get there. I'd love to hear Doug's stories. 2 Quote Link to comment Share on other sites More sharing options...
ClausB Posted October 5, 2017 Share Posted October 5, 2017 This preproduction cart would fit in this 400: http://atariage.com/forums/topic/203281-atari-400800-smaller-cartridge-slots/?do=findComment&comment=2606542 2 Quote Link to comment Share on other sites More sharing options...
Tempest Posted October 5, 2017 Share Posted October 5, 2017 Tempest, there isn't "two" one of a kind prototypes for the 400. What Curt was talking about is that Doug also had the first "Stella" (2600 of course) in his possession. He had the 2600 and 400 but unfortunately Doug believed in a video store owner and let him borrow it as a display and never received it back. I'm currently trying to track down the store owner to see if I can retrieve it. I'm so blown away with the knowledge and passion of everyone on here and I'm just disappointed that I didn't know about this before Doug passed away; he would have loved this site. I'd still like to upload some of Doug's audio recordings talking about how and why they designed things the way they did. Plus his description of how things were done at Atari is just the best. Gotcha. I misread that. Quote Link to comment Share on other sites More sharing options...
+MrFish Posted October 5, 2017 Share Posted October 5, 2017 This preproduction cart would fit in this 400: http://atariage.com/forums/topic/203281-atari-400800-smaller-cartridge-slots/?do=findComment&comment=2606542 Interesting... I missed that thread at the time. Quote Link to comment Share on other sites More sharing options...
Heaven/TQA Posted October 5, 2017 Share Posted October 5, 2017 cool pics... interesting how far we got into designs of motherboards... look how "big" and much space between the parts are... that's why I love my 800 model. 1 Quote Link to comment Share on other sites More sharing options...
JamesD Posted October 5, 2017 Share Posted October 5, 2017 Do you think the 2nd cart on the 800 was partially because the first cart didn't have enough address lines to do a lot?No I haven't read the contents of the notebook yet, I'm low on data until next week. Quote Link to comment Share on other sites More sharing options...
Bryan Posted October 5, 2017 Share Posted October 5, 2017 Do you think the 2nd cart on the 800 was partially because the first cart didn't have enough address lines to do a lot? No I haven't read the contents of the notebook yet, I'm low on data until next week. That may have been part of the thinking, but the stated reason was that they wanted a system of program cartridges that would be combined with various data cartridges to make an expandable system. Quote Link to comment Share on other sites More sharing options...
Rybags Posted October 5, 2017 Share Posted October 5, 2017 Without having read the notebook, I would suspect: . they were probably just concerned in the early days with having a working system to test OS, languages, applications and games and the minimalist configuration compared to what we have probably was never intended to be the production config. . 800, the modular strategy probably foresaw teamed up language and utility/Dos carts in left/right slots which never really eventuated and was independent and irrespective of the early low capability slot. Maybe a little strange that nobody ever bothered doing a Dos on Right Cartridge though it would have meant an 8K Ram hole. Though doing it as switchable with a bit of low-Ram resident code could have utilized the $8000-$9FFF Ram as buffers. Probably questionable value though, having a Dos that left you with around 29K low Ram and 8K high Ram if the left cart wasn't present. Quote Link to comment Share on other sites More sharing options...
JamesD Posted October 5, 2017 Share Posted October 5, 2017 Without having read the notebook, I would suspect: . they were probably just concerned in the early days with having a working system to test OS, languages, applications and games and the minimalist configuration compared to what we have probably was never intended to be the production config. That I would believe. The size may have been as simple as "how much space to you think we'll need for BASIC?" . 800, the modular strategy probably foresaw teamed up language and utility/Dos carts in left/right slots which never really eventuated and was independent and irrespective of the early low capability slot. I was kinda thinking a standard BASIC and an Extended BASIC upgrade. That's sort of the route Microsoft was taking. But that would leave questions around the 400. Maybe a little strange that nobody ever bothered doing a Dos on Right Cartridge though it would have meant an 8K Ram hole. Though doing it as switchable with a bit of low-Ram resident code could have utilized the $8000-$9FFF Ram as buffers. Probably questionable value though, having a Dos that left you with around 29K low Ram and 8K high Ram if the left cart wasn't present. The one major oversight in the design of these machines, was not foreseeing banking out ROM for RAM. Anything that would bring the Atari closer to that would help, but without support beyond the 800, I question the usefulness. The Apple language card didn't come out until 1979, so I don't see how Atari could have foreseen that. Quote Link to comment Share on other sites More sharing options...
Bryan Posted October 5, 2017 Share Posted October 5, 2017 The one major oversight in the design of these machines, was not foreseeing banking out ROM for RAM. There was a time when 64K was considered vast. So vast, in fact, that saving a few cents on logic ICs was preferable to decoding the address space efficiently. They probably also thought that these computers would be replaced with something new in a few years anyway. In the end, Atari did improve the 400 and 800 specs over the development cycle, and the 800's 48K limit is pretty reasonable considering that it would have been a lavish system for the home in 1979. Quote Link to comment Share on other sites More sharing options...
JamesD Posted October 5, 2017 Share Posted October 5, 2017 There was a time when 64K was considered vast. So vast, in fact, that saving a few cents on logic ICs was preferable to decoding the address space efficiently. They probably also thought that these computers would be replaced with something new in a few years anyway. In the end, Atari did improve the 400 and 800 specs over the development cycle, and the 800's 48K limit is pretty reasonable considering that it would have been a lavish system for the home in 1979. Yeah, 64K was vast at the time since assembly language or BASIC were the norm at the time, and it wasn't even an Extended BASIC. Star Trek was a large BASIC program, and most machines used printable graphics (semi-graphics). I think hi-res graphics were a major contributor to the drive for more RAM. Quote Link to comment Share on other sites More sharing options...
ClausB Posted October 5, 2017 Share Posted October 5, 2017 Look at DeCuir's memory map (and my 800 #26 thread) and see they had planned only 36K RAM for the 800, with no overlap with cart ROM. I think DOS in the right cart would have made sense with a language in the left cart. Free RAM would have been a little more even than in a production 800 with BASIC cart and DOS loaded from disk. 1 Quote Link to comment Share on other sites More sharing options...
+DrVenkman Posted October 6, 2017 Share Posted October 6, 2017 64K RAM wasn't just vast for the era, it was EXPENSIVE! People today don't realize quite how expensive. Memory prices were so exorbitant, and the market so cut-throat even into the 80's, that Jack's Atari Corp. was investigated by the FBI for illegal DRAM chip imports. atariage.com/forums/topic/207245-secret-atari-dram-resale-operation-revealed-by-fbi/ The link in the first post is dead, but Kevin Savetz has reposted the FOIA response from the FBI at Archive.org: www.atariarchives.org/atarileaks/ I have no doubt that the relative cost of DRAM was a major impact in those initial designs. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.