Shift838 Posted May 5, 2018 Share Posted May 5, 2018 (edited) SCART-Genie 9640 Pre-order NOW! Get your order in and reserve yours today! *** PCB's and parts will not be ordered until June 5, 2018. *** Hook your Geneve 9640 to a SCART enabled monitor with no soldering! All units will be hand assembled and tested before shipping on a real Geneve 9640 and SCART monitor. Check out the video of the unit in action... HERE Currently accepting PayPal at my below store. https://shift838.fwscart.com I have opted not to sell the cables but provide links to where I get them as the cables are heavy and will cause shipping to be more expensive, especially overseas. The links are in my description on the store. This will allow to keep cost down as these cables are sold everywhere online. Edited May 5, 2018 by Shift838 3 Quote Link to comment Share on other sites More sharing options...
FDOS Posted May 5, 2018 Share Posted May 5, 2018 SCART-Genie 9640 Pre-order NOW! Get your order in and reserve yours today! *** PCB's and parts will not be ordered until June 5, 2018. *** Hook your Geneve 9640 to a SCART enabled monitor with no soldering! All units will be hand assembled and tested before shipping on a real Geneve 9640 and SCART monitor. Check out the video of the unit in action... HERE Currently accepting PayPal at my below store. https://shift838.fwscart.com I have opted not to sell the cables but provide links to where I get them as the cables are heavy and will cause shipping to be more expensive, especially overseas. The links are in my description on the store. This will allow to keep cost down as these cables are sold everywhere online. Any other way to pay besides PayPal? Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted May 5, 2018 Share Posted May 5, 2018 I put in an order for a pair of them. . . Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted May 5, 2018 Share Posted May 5, 2018 yep, have ordered 2. It was 20$ for shippy to GER only, if you need more just give me a ping. But one ping only thanks Quote Link to comment Share on other sites More sharing options...
Shift838 Posted May 5, 2018 Author Share Posted May 5, 2018 Any other way to pay besides PayPal? not currently online. I can work something out privately PM me for different payment methods. Money order, etc... as long as I have it before June 5 it will work for the order. Quote Link to comment Share on other sites More sharing options...
Shift838 Posted May 6, 2018 Author Share Posted May 6, 2018 I see the orders. I do have enough boards to make 8 PCB's right now. I'm just waiting on the SCART pcb sockets. I got notified they shipped today so hopefully in about 10 days I will see them. 1 Quote Link to comment Share on other sites More sharing options...
+9640News Posted May 8, 2018 Share Posted May 8, 2018 Order placed. Quote Link to comment Share on other sites More sharing options...
+FarmerPotato Posted May 8, 2018 Share Posted May 8, 2018 I ordered two! Any chance of offering a kit form? I would order two more for the future. Quote Link to comment Share on other sites More sharing options...
RickyDean Posted May 8, 2018 Share Posted May 8, 2018 I have to see where my wallet can carry me, had a couple of unforeseen things, such as bad Geneve (have to buy replacement parts). Will see soon. Quote Link to comment Share on other sites More sharing options...
Swim Posted May 10, 2018 Share Posted May 10, 2018 Maybe we should start a list of compatible LCD flat screens/monitors someplace? The Genenve9640 Yahoo group? This thread? 2 Quote Link to comment Share on other sites More sharing options...
atrax27407 Posted May 10, 2018 Share Posted May 10, 2018 This thread is fine with me. Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted May 10, 2018 Share Posted May 10, 2018 Maybe we should start a list of compatible LCD flat screens/monitors someplace? The Genenve9640 Yahoo group? This thread? Just a small start: Quote Link to comment Share on other sites More sharing options...
Shift838 Posted May 13, 2018 Author Share Posted May 13, 2018 I have added a couple of additional options for the enthusiast by request on the store. PCB only PCB + Parts KIt About 3 more weeks before pre-order is closed.. 1 Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted May 13, 2018 Share Posted May 13, 2018 Maybe we should start a list of compatible LCD flat screens/monitors someplace? The Genenve9640 Yahoo group? This thread? http://15khz.wikidot.com/ Sent from my LG-H872 using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
Shift838 Posted May 15, 2018 Author Share Posted May 15, 2018 i got some more of the SCART sockets in today so I can start building a few boards and get them out with the ones I have from the first order. I will be building and testing probably this weekend So if you ordered, watch your email. 3 Quote Link to comment Share on other sites More sharing options...
Shift838 Posted May 18, 2018 Author Share Posted May 18, 2018 Got this batch built. Will wait to order more boards when the pre-order is up. All Pre-order users watch your emails. I'll be filling based on first order sequence. My wife even built 2 of them! All tested... 4 Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted May 19, 2018 Share Posted May 19, 2018 Quote Link to comment Share on other sites More sharing options...
Shift838 Posted May 22, 2018 Author Share Posted May 22, 2018 about 2 weeks tops before the preorder closes. 1 Quote Link to comment Share on other sites More sharing options...
+9640News Posted May 22, 2018 Share Posted May 22, 2018 Is there a current monitor at something like www.Frys.com one can order supporting the SCART that will work well with the Geneve? Beery Quote Link to comment Share on other sites More sharing options...
Shift838 Posted May 22, 2018 Author Share Posted May 22, 2018 I have not seen any monitors at Frys.com that support SCART. There is a list of compatible monitors. I know the Samsung 910mp and the 711mp work very well. If you have an HDMI monitor (I have a nice AOC ) and my SCART to HDMI upscaler works nice with it. Quote Link to comment Share on other sites More sharing options...
+9640News Posted May 22, 2018 Share Posted May 22, 2018 I want to make sure. This upscaler have any issues? https://www.amazon.com/CiBest-Converter-Adapter-Support-Set-top/dp/B06Y43RVLH/ref=sr_1_2?ie=UTF8&qid=1527019249&sr=8-2&keywords=scart+to+hdmi+upscaler Beery Quote Link to comment Share on other sites More sharing options...
Shift838 Posted May 22, 2018 Author Share Posted May 22, 2018 I want to make sure. This upscaler have any issues? https://www.amazon.com/CiBest-Converter-Adapter-Support-Set-top/dp/B06Y43RVLH/ref=sr_1_2?ie=UTF8&qid=1527019249&sr=8-2&keywords=scart+to+hdmi+upscaler Beery I used one very similar to that one by Elephas and it works good. I have only found the Elephas on ebay in the UK though, and the first one never arrived. I also tried one by TNP I purchased off Amazon and it worked good too (before I dropped it, then no worky at all). I have not tried the CiBest one. I did try to replace the TNP with one made by ELUTANG that I bought of amazon and that one did not work well. So I think it's dependent on how good the components are inside. I did open the TNP and the ELUTANG and as far as the board and placement of the components they were identical. many different manufactures make these things. I think if you stick with a $35 and over you probably have a better chance of quality. Quote Link to comment Share on other sites More sharing options...
+9640News Posted May 28, 2018 Share Posted May 28, 2018 Chris, I got time today to pull the old Geneve monitor out and replace it with a 21" widescreen today using the two cables mentioned and the SCART to HDMI converter I referenced in another thread. All looks and works well. Would love it if someone produces a 3D case for the card!!! Hint hint for someone! Anyways, all is well, and the image quality looks great. I have not attached speakers yet which will be the next step when I get time. Beery 2 Quote Link to comment Share on other sites More sharing options...
Shift838 Posted May 28, 2018 Author Share Posted May 28, 2018 Chris, I got time today to pull the old Geneve monitor out and replace it with a 21" widescreen today using the two cables mentioned and the SCART to HDMI converter I referenced in another thread. All looks and works well. Would love it if someone produces a 3D case for the card!!! Hint hint for someone! Anyways, all is well, and the image quality looks great. I have not attached speakers yet which will be the next step when I get time. Beery Great to hear Beery.. 1 Quote Link to comment Share on other sites More sharing options...
Shift838 Posted May 29, 2018 Author Share Posted May 29, 2018 I got some more built and ready to ship! Emails already sent... 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.