Jump to content
IGNORED

looking for help...


ziggomatic

Recommended Posts

Hey everyone

 

I'm new to this message board, and new to Atari's :)

 

Well, I just got hold of an Atari 1040STe. I've opened it up and I'm sure it's got 4MB of RAM.

 

I'm hoping if someone on here from England could tell me how much it would cost to get the TOS upgraded to something like 2.06. I know that it's god an old one, I think it might be TOS 1.0.

 

I would really like to get it upgraded, and I'm just hoping that it's not going to cost too much!

 

Also, I'm trying to get hold of an Atari Portfolio (the handheld computer that John Conner uses to hack into an ATM in Terminator 2)

 

Thanks everyone

Link to comment
Share on other sites

You mean the actual Portfolio used by Edward Furlong in T2??

My god... that thing went for $12,000 last time (I think). I can't

recall the auction site that sold it...perhaps it was Fleetwood-Owen

(yes, that's Mick Fleetwood). Good luck on finding it. I've got my

eye on Biff Tannen's Oh-la-la magazine seen in Back To The

Future II.... but I'll never actually have enough money to get it.

< I just have my eye on it.... no comment! >

 

If I understood you wrong, there is a thread here that has some

board members that might be willing to part with one of theirs.

Link to comment
Share on other sites

I have seen one one on ebay a month or so back, probably worth setting up a search and getting it to email you if any appear. I believe that the German EBay is pretty good for Atari stuff as Atari was very popular over in Germany. Possibly look there?

 

I myself have a German one, the keyboard is a little odd with the chars mixed around, but the keymap sorts that out :)

 

Not sure where you could get a TOS upgrade from now, Best Electronics may still sell them (US). I got the T-Board when it was released and recommend that one :)

 

I suppose you could get hold of the ROM image and just burn the ROM's yourself and give that a go? There is a Pirate version that you can boot up with (loads from Disk). as long as you don't mind loosing some RAM?

Link to comment
Share on other sites

well, i have no way of finding out what version of TOS is on there, all I can tell you is that the menus on the main desktop are VERY limited

 

there's no option for customising the colour of the desktop or anything...i don't even have the option to install a desktop icon!

Link to comment
Share on other sites

  • 2 weeks later...

you have TOS 1.6 in your STe, Mega STe's have TOS 2.05 for ones with 720K DSDD drive and TOS 2.06 for the ones with the 1.44Mb DSHD disk drive. As far as the upgrade you have 2 choices, you can buy the ROMS, there are 2 of them, and replace the TOS 1.6, with the TOS 2.06, or you can get a switchable ROM board with the TOS 2.06, with those you pull out the TOS 1.6 roms, insert the board into the ROM sockets on the motherboard, and then insert your TOS 1.6 ROMS into the empty sockets on the board, this gives you the option of switching between the two operating systems. check online for atari vendors to locate someone that has the parts you need. For future reference here is the TOS versions

 

1.0 - originally on disk, then on ROMS, found in Atari ST's made in 1985/86

 

1.2 - First revison found in ST's and Mega ST's made from 87-89

1.4 - Second revision, called rainbow TOS for the multicolor atari logo

under the "DESK" menu - note TOS 1.6 for STe's is essentially the

same version with additional code for blitter chip and extended

pallette and stereo sound

1.6 - Atari STe version of TOS 1.4

2.05 - Mega STe version of TOS 1.6

2.06 - revised version of 2.05 with support for high density disk drives

3.05 - for Atari TT030's with DSDD disk drives

3.06 - revised version for TT030's with 1.44Mb floppys

4.00 - prototype for Atari Falcon030

4.04 - general release for Atari Falcon030

 

hope this answers some questions, feel free to email me at Ron_Sircar@hotmail.com if you have any tech questions about your atari computers, I used to repair them back in the day :)

Link to comment
Share on other sites

I'm assuming I have version 1.2(1.02?) on my 1040STf, it's on two chips, but my ST doens't show the exact version number anywhere. So, what is the latest version that an unmodified 1040STf can use? Can the 1040STf be upgraded to use the newer STE/TT/Falcon TOS's? I plan on upgrading my STF with a blitter and some other minor hacks, so if using an STE version of TOS is possible, to take advantage of the Blitter, etc., I want to know.

Link to comment
Share on other sites

What's this 4.92 thing? I didn't know!

What are the diffferences?

Does it deserve a trial run?

 

P

 

Tos 4.92 is the last Falcon TOS from Atari. It was almost complete (I assume that from what I've read on the 'net), when Atari folded, so it was never released. But in the 'net you could find it easily. TOS 4.92 could be loaded from a floppy disk or the disk drive. Nice to note that, when loaded, it shows the Star Trek UFP logo instead of Fuji at the start screen :)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...