RoohBear Posted August 26, 2012 Share Posted August 26, 2012 Hi everyone, I'm new here but have had my Atari 800 since I was a little kid in the 80's. I've kept all my stuff all these years because I don't like throwing things away, plus I still have an app I wrote in 6502 assembly that started my career. I'm a full-time Software Engineer who's seen a fair bit of the world writing apps and utilities. One job led me to Microsoft in California where I believe I lived right across the street from where Atari was based. It's condo's now :-( I'm wondering if someone can help me restore some files I have on some floppy disks. In particular, I need help recovering an app I wrote in MAC65. I don't remember how to use MAC65 and even if I did, it crashes a lot. When I try to run the app I wrote, I get an error that the disk is write protected but it's not. My 1050 has a switch I installed on it long ago that would let me copy disks, but it's broken now and I don't remember what exactly it does or how to use it. Can someone make a cable for me so I can get the files off the floppies and into my Mac or PC? I'm in Toronto, Canada. -greg- Quote Link to comment Share on other sites More sharing options...
Sub(Function(:)) Posted August 26, 2012 Share Posted August 26, 2012 Welcome I am sure someone will point you in the direction of the thread for newbies. but in the mean time you may want to look at this site http://www.atarimax.com/ for getting things off old disks you need you need ProSystem manual here http://www.atarimax.com/ape/prosys.htm Quote Link to comment Share on other sites More sharing options...
snicklin Posted August 26, 2012 Share Posted August 26, 2012 Hi Greg, Welcome back to the world of Atari. I myself returned for a short time around 2000 but then came back fully around 2007. In answer to your question, I don't have the technical knowledge for the cable. However, it may be easier if you send your disks to somebody (probably in the US to keep the costs down) and then they transfer it across to the PC for you, then they send you the files electronically. Steve Quote Link to comment Share on other sites More sharing options...
russg Posted August 26, 2012 Share Posted August 26, 2012 (edited) Hi everyone, I'm new here but have had my Atari 800 since I was a little kid in the 80's. I've kept all my stuff all these years because I don't like throwing things away, plus I still have an app I wrote in 6502 assembly that started my career. I'm a full-time Software Engineer who's seen a fair bit of the world writing apps and utilities. One job led me to Microsoft in California where I believe I lived right across the street from where Atari was based. It's condo's now :-( I'm wondering if someone can help me restore some files I have on some floppy disks. In particular, I need help recovering an app I wrote in MAC65. I don't remember how to use MAC65 and even if I did, it crashes a lot. When I try to run the app I wrote, I get an error that the disk is write protected but it's not. My 1050 has a switch I installed on it long ago that would let me copy disks, but it's broken now and I don't remember what exactly it does or how to use it. Can someone make a cable for me so I can get the files off the floppies and into my Mac or PC? I'm in Toronto, Canada. -greg- The days of making a cable are pretty much over. Those days you could make a SIO2PC cable with a 1489 chip, a diode and of course the PC serial cable and Atari SIO cable. Do you have access to a computer with a serial port? also called a RS232 port. Most people would need a USB to SIO device, like the one at Atarimax. I'm in Cleveland, Ohio and would transfer the disks for you, for the cost of postage to mail them back. Edited August 26, 2012 by russg Quote Link to comment Share on other sites More sharing options...
BillC Posted August 26, 2012 Share Posted August 26, 2012 Hi everyone, I'm new here but have had my Atari 800 since I was a little kid in the 80's. I've kept all my stuff all these years because I don't like throwing things away, plus I still have an app I wrote in 6502 assembly that started my career. I'm a full-time Software Engineer who's seen a fair bit of the world writing apps and utilities. One job led me to Microsoft in California where I believe I lived right across the street from where Atari was based. It's condo's now :-( I'm wondering if someone can help me restore some files I have on some floppy disks. In particular, I need help recovering an app I wrote in MAC65. I don't remember how to use MAC65 and even if I did, it crashes a lot. When I try to run the app I wrote, I get an error that the disk is write protected but it's not. My 1050 has a switch I installed on it long ago that would let me copy disks, but it's broken now and I don't remember what exactly it does or how to use it. Can someone make a cable for me so I can get the files off the floppies and into my Mac or PC? I'm in Toronto, Canada. -greg- AAuser atari8warez is also located in Toronto and sells SIO2PC devices that work with AspeQT. He has also developed a USB version that auto-switches between SIO2PC and 1050-2PC modes: http://www.atariage.com/forums/topic/198121-sio2pc10502pc-dual-usb-ordering-information/ Quote Link to comment Share on other sites More sharing options...
jacobus Posted August 26, 2012 Share Posted August 26, 2012 Greg I live in Oakville. Send me a PM and we can likely set up a time and place where I can help you. Quote Link to comment Share on other sites More sharing options...
RoohBear Posted August 26, 2012 Author Share Posted August 26, 2012 Thanks everyone! I'll probably hook up with Moonsweeper who lives very close, or mail my floppies to russg in Cleveland. I'll let you know what happens, and maybe even release the source code to my little app. Thanks! Quote Link to comment Share on other sites More sharing options...
atari8warez Posted September 14, 2012 Share Posted September 14, 2012 Thanks everyone! I'll probably hook up with Moonsweeper who lives very close, or mail my floppies to russg in Cleveland. I'll let you know what happens, and maybe even release the source code to my little app. Thanks! hi, as BillC already mentioned, I live in Canada and I am in Toronto. I can make you a cable or copy your disks for you. Copying i can do without charge, juswt for the postage or even you can bring your disks if we are close enough. I am in East Scarborough (near the Toronto Zoo). PM me if interested. Ray Quote Link to comment Share on other sites More sharing options...
john-m Posted September 14, 2012 Share Posted September 14, 2012 To transfer files to a PC from an atari, I highly recommend SIO2PC/10502PC from atariwarez. With it and either a program called APE or aspiqt, you can copy the files from those and any other atari disks to an atr image on your PC and further use them with an atari emulator on your PC. I have did such myself even to the extent of building my own hardware interface. Quote Link to comment Share on other sites More sharing options...
pixelmischief Posted September 15, 2012 Share Posted September 15, 2012 "Transferring [the files over SIO2PC], while expeditious, and certainly painless, might not be, in a manner of speaking, the [Atari] way." - Col. Nathan Jessup, "A Few Good Men" Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.