ctirad Posted December 6, 2013 Share Posted December 6, 2013 Hi there.I'm offering PS/2 mouse adapter for Atari ST/Amiga with the following features: Atari ST/Amiga mode (switchable) third mouse button support on a machines that support it Slow mode for other computers, namely XL/XE, which cannot read the default full speed small enough to fit inside ST kebyoard (see photos) The modes can be switched durning power on by holding a mouse button durning power on: LMB switches between Atari ST and Amiga mode. RMB switches between default and slow mode. You can hold both buttons to switch both modes in the same time. The actual configuration is then stored into internal EEPROM. The price is 12 EUR + 3 EUR shipping to Europe or 4 EUR outside Europe. I'm accepting Paypal only. Quote Link to comment Share on other sites More sharing options...
Charlie_ Posted January 5, 2014 Share Posted January 5, 2014 Hello. Would you know if this mouse adapter would allow a mouse to work in Atari mode on the 8-bit Atari. There are a couple games I can think of, Missile Command + and the new Pad game. Thanks! http://atariage.com/forums/topic/191864-pad-15-beta/page-3?do=findComment&comment=2897188 Quote Link to comment Share on other sites More sharing options...
ctirad Posted January 8, 2014 Author Share Posted January 8, 2014 Sure. If the application supports either Atari ST or Amiga mouse it will work. The PAD for example, works perfectly even in the default high DPI mode. For some apps, like GUI, you need to switch the adapter onto slow mode, but that's all. Quote Link to comment Share on other sites More sharing options...
Charlie_ Posted January 9, 2014 Share Posted January 9, 2014 Sure. If the application supports either Atari ST or Amiga mouse it will work. The PAD for example, works perfectly even in the default high DPI mode. For some apps, like GUI, you need to switch the adapter onto slow mode, but that's all. Thank you for the reply! Quote Link to comment Share on other sites More sharing options...
Koji77 Posted January 12, 2014 Share Posted January 12, 2014 how do I order? how much is that $U.S. ?? Thanks!! Quote Link to comment Share on other sites More sharing options...
Charlie_ Posted January 12, 2014 Share Posted January 12, 2014 how do I order? how much is that $U.S. ?? Thanks!! Send a PM to Ctirad. I think the total is $23 US. I ordered a couple days ago. Looking forward to trying it out Quote Link to comment Share on other sites More sharing options...
Charlie_ Posted January 31, 2014 Share Posted January 31, 2014 Received my adapter yesterday and wanted to say it works fantastic. I tried several LED PS/2 mice on my Mega STe and all worked great. One mouse in particular had too much acceleration, but all the others were just right. I was even able to use an older Logitech USB wheel mouse with an adapter to PS/2 and it worked great also. On the A8 the mouse worked perfectly at default speed with the game Pad, and Missile Command + (press cntrl-t for trakball) Nice and smooth. I should have ordered two... Quote Link to comment Share on other sites More sharing options...
eightbit Posted February 2, 2014 Share Posted February 2, 2014 I pmed but did not receive a reply. I want one too Quote Link to comment Share on other sites More sharing options...
Bill Loguidice Posted February 2, 2014 Share Posted February 2, 2014 I pmed but did not receive a reply. I want one too I had PM'd too and also did not receive a reply. Quote Link to comment Share on other sites More sharing options...
eightbit Posted February 4, 2014 Share Posted February 4, 2014 Received a reply shortly after my post. I am looking forward to the adapter! Quote Link to comment Share on other sites More sharing options...
eightbit Posted February 20, 2014 Share Posted February 20, 2014 Received mine today. Highly recommended device! I am using it with a "Roadrunner" PS2 mouse I found at a local Goodwill for a dollar. Very low profile device, and works perfectly with my 1040STfm. I'd like to order another one! GREAT job on this! Quote Link to comment Share on other sites More sharing options...
jttheninja Posted March 9, 2014 Share Posted March 9, 2014 I will have to keep this in mind...I use an original IBM PS/2 mouse at work because I love the feel of it. [] Quote Link to comment Share on other sites More sharing options...
eightbit Posted March 11, 2014 Share Posted March 11, 2014 You just reminded me that I have to pick up another logitech trackball mouse Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.