walter_J64bit Posted January 13, 2014 Share Posted January 13, 2014 Ok I'm setting up my STe, so I've pulled out my 3 50 pin SCSI hard drives all seem to dead but that's ok. I see some 3.5" 50 pin SCSI on ebay going for good prices now, I should be able to install a 3.5" drive in the old 5.25" drive case with no problems right? (other then needing bay adapter kit) Quote Link to comment Share on other sites More sharing options...
Charlie_ Posted January 13, 2014 Share Posted January 13, 2014 I think the SCSI drive needs to have a jumper to disable parity? Not too sure though. I had about 7 scsi drives of various age and could not get any to be seen by my Mega STe. Quote Link to comment Share on other sites More sharing options...
walter_J64bit Posted January 13, 2014 Author Share Posted January 13, 2014 (edited) Ok, thanks for that! I've tried the drivers on their own the IBM driver is runing just fine on it's own. Now for the 20mb drive, the busy light flashes but with scsi cable hooked to it. The 45mb drive, ICD's hard drive app is telling that the drive is unstable. Edited January 13, 2014 by walter_J64bit Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.