donnerkuh Posted March 21, 2014 Share Posted March 21, 2014 I´m using a Megafile on my 1040 STE. I´m able to use the driver disk to format, park, and create partitions on the megafile. But how do i get a icon on my desktop (like for the Floppy A: and B:)? Would it appear automaticly if everything is ok? I have no chance to put files on it, or open the directory . If i try to put drivers on the harddisk with the driver disk, i get an error. Is it correct, that my Megafile is Unit1 (Unit0 to 8 is possible, should it be Unit0)? Is it a problem that the Megafile has 3 bad Sectors? Please help Greetings from germany Wolfgang Quote Link to comment Share on other sites More sharing options...
+DarkLord Posted March 22, 2014 Share Posted March 22, 2014 What version of TOS are you using? Either pick the "Install all devices" option (newer TOS versions) or just highlight A or B, then pick "install disk drive" from a drop down menu, as in TOS v1.04. Once the window pops up, then you can assign a drive letter and name, etc,.. Put the new icon where you want it and don't forget to save the desktop so it will remember the changes after you restart. This is assuming that everything else (hard drive wise) has been set up correctly. HTHs. Quote Link to comment Share on other sites More sharing options...
donnerkuh Posted March 25, 2014 Author Share Posted March 25, 2014 Problem solved. I had to open the Megafile and change the 3 dip-switches to "on". In the future i have to take care, that the first megafile will be unit 0, not unit 1 Thank you for your help! Quote Link to comment Share on other sites More sharing options...
+DarkLord Posted March 26, 2014 Share Posted March 26, 2014 Glad you got it resolved. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.