hawkeye1103 Posted June 17, 2014 Share Posted June 17, 2014 have a couple of problems with my sega game gear (i have the 2asic version)I have been having this game gear for 10 years or so and want to refurbish it. I have converted it to LED backlight and changed the caps of the power board and the console itself but it's in a non working state.I have the following problems with it: The console itself is not working, I have a white screen all the time, tried cleaning the cartridge and the connector still no improovementAnd the power board is a bit problematic, it works on batteries (meaning the console turns on) but if i put it on an AC power adaptor it doesn't wanna work. I have tried to check for voltages but it seems like the power is coming into the device but nothing else except that. I posted also a couple of pictures maybe someone can point out the problem. Thank you in advance y'all Quote Link to comment Share on other sites More sharing options...
Osgeld Posted June 18, 2014 Share Posted June 18, 2014 (edited) is the 100uf cap in the upper left shorting out the contrast pot? in that picture it looks like the metal top is making contact with the leads Edited June 18, 2014 by Osgeld Quote Link to comment Share on other sites More sharing options...
hawkeye1103 Posted June 18, 2014 Author Share Posted June 18, 2014 I'll have a look at it ... tho i think it's not making contact;) thanks for the pointer Quote Link to comment Share on other sites More sharing options...
Uzumaki Posted June 20, 2014 Share Posted June 20, 2014 Try tilting the Game Gear to almost flat. If you can see the image, the caps on the main board are bad. I've recapped 2 Game Gears in similar conditions (one 2ASIC and one v04) and I have a 3rd one that still works fine, a Majesco model but it may need new cap soon. Their LCD is a bit better than Sega models. PS Majesco model can be identified by these 3 features if you're looking in the wild, in gaming store, and on auctions. Majesco model is black while Sega model is dark grey Start button is purple instead of blue 3 dot logo by the LCD are white instead of red/green/blue. Quote Link to comment Share on other sites More sharing options...
Seob Posted June 20, 2014 Share Posted June 20, 2014 (edited) I would have a look near c36 and c49 looks like solder shorts other contacts. Edited June 20, 2014 by Seob Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.