d3bug Posted July 21, 2014 Share Posted July 21, 2014 I am using Altirra 2.40 to run bobsterm. No matter what command I issue inside the terminal (for example: ATDI BFBBS.NO-IP.COM 23) it returns "ERROR"... I have tried all baud rates, and I just don't know what I am missing... shouldn't this be connecting? PLEASE HELP. Quote Link to comment Share on other sites More sharing options...
David Baldwin Posted July 21, 2014 Share Posted July 21, 2014 You have to setup your serial port options first when you set those up add the ip address in the dial proxy address like this for yyzbbs 99.116.104.171 and port numb 23 when thats all setup go back into the bobterm terminal and type atdt them press control them the m key bobterm with dial out and your on line good luck. David B Quote Link to comment Share on other sites More sharing options...
phaeron Posted July 24, 2014 Share Posted July 24, 2014 ATDI should also work. Check that you have the translation in BobTerm set to Ascii and that you can get an OK prompt with AT<Enter>. Quote Link to comment Share on other sites More sharing options...
scotty Posted July 25, 2014 Share Posted July 25, 2014 I am on my android tablet, and don't have my computer in front of me. But there is a native PC program that I can not think of the name of that does Atascii. Works great, but I have not used it in a long time and forget the name. Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.