Tickled_Pink Posted July 22, 2014 Share Posted July 22, 2014 I've finally got around to opening up my faulty Vectrex. Bought in 1984, it was working perfectly until a couple of years ago. Now, I get nothing. Not even a buzz. What I can say for certain is that there is power going through it. The power board's very clean. The logic board's a little dusty (and there were a few cibwebs in it) but nothing excessive. When I power on all that happens is that the little glass bulb at the back of the CRT starts glowing. That's the only sign of life. Anyone have any ideas? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.