Manoau2002 Posted August 1, 2014 Share Posted August 1, 2014 I recently bought one of these devices and downloaded the package from the SD2IEC website. I have tried loading the device using the LOAD"FB20",8,1 command and also the LOAD"*",8,1 command. In both cases I get an error on the Vic 20 that there is no connected device . The two buttons on the sd2iec do not light up at all when connected to the Vic 20. (I don't know if they are suppose to or not but I thought it could be important info) Quote Link to comment Share on other sites More sharing options...
+eebuckeye Posted August 2, 2014 Share Posted August 2, 2014 Sure it is getting power? Make sure the power is plugged in correctly (not upside down which is easy to do) Quote Link to comment Share on other sites More sharing options...
Manoau2002 Posted August 2, 2014 Author Share Posted August 2, 2014 You nailed the problem. Thanks for the help. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.