Jump to content
IGNORED

Odyssey2 'the Voice' no longer works in MESS .158


shertz

Recommended Posts

The two best ways I found to utilize cart slot input devices, such as the O2 voice module, for MESSUI is as follows:

 

1. After highlighting Odyssey 2 on the left side of the Window, on the right side, select the 'Software' tab, and highlight 'voice':

 

post-18-0-73547900-1425048796_thumb.png

 

2. After launching the system with "voice" highlighted, you then need to enable partial keyboard support, and enable the 'Tab' internal menus, by pressing 'Scroll Lock':

 

post-18-0-68941800-1425049010_thumb.png

 

3. Now press the 'Tab' Key, go to "File Manager" using the arrow keys for navigating:

 

post-18-0-64606100-1425049178_thumb.png

 

4. Press 'Enter', you'll see this next screen:

 

post-18-0-04482200-1425049216_thumb.png

 

5. Using arrow keys again, navigate to "cartridge2 (cart2)", press 'Enter' and then go to your game ROM, pressing 'Enter' again on the game to launch it with the Voice module attached.

 

Alternatively, after Step 1, if you have the internal (Non-'Tab') menus turned on, you can select the second slot from there and launch your game ROM image from there as well, via "Devices" --> "Odyssey 2 Cartridge Slot [empty slot]" --> "Mount"

 

post-18-0-20943700-1425050049_thumb.png

 

The same principle steps are involved for utilizing the 7800 with XM module attached, or any other system which has a device that is setup as a slot input via the cartridge port. ;)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...