+xucaen Posted February 28, 2015 Share Posted February 28, 2015 How would I go about fixing this end label? I wasn't sure if there was a particular kind of glue that should be used so as not to completely destroy the label. Quote Link to comment Share on other sites More sharing options...
Cobra Commander Posted February 28, 2015 Share Posted February 28, 2015 Why would you fix Defender? I like clear dry craft glue like "Tacky Glue" I've also used Elmer's school glue. Quote Link to comment Share on other sites More sharing options...
Atari_Bill Posted February 28, 2015 Share Posted February 28, 2015 I always use a glue stick. Never had any issues. 2 Quote Link to comment Share on other sites More sharing options...
Philflound Posted February 28, 2015 Share Posted February 28, 2015 This topic has been discussed many times over. Regardless, I use school glue also. You may have to wipe excess off if it goes around the label. Never had labels fall off after being re-glued. Phil 1 Quote Link to comment Share on other sites More sharing options...
phattyboombatty Posted February 28, 2015 Share Posted February 28, 2015 This stuff right here. Works for everything. Best stuff ever! If the label is halfway off like yours demonstrates, I carefully pop off (or gently peel off) the entire label using a hair dryer. This warms up the crusty ol' glue, and keeps everything kosher. Take your label outside, turn it face down onto a piece of scrap cardboard. Give a short burst of Super 77 once or twice—a thin, even layer is all you need—and voila! You've got a fresh layer of adhesive for perfect label placement. 1 Quote Link to comment Share on other sites More sharing options...
Emehr Posted February 28, 2015 Share Posted February 28, 2015 I second the glue stick. Nothing fancy. I re-stuck my Night Driver end label years ago and it's still attached with no discoloration or any other observable side effects. Quote Link to comment Share on other sites More sharing options...
Atari_Bill Posted February 28, 2015 Share Posted February 28, 2015 I second the glue stick. Nothing fancy. I re-stuck my Night Driver end label years ago and it's still attached with no discoloration or any other observable side effects. I've used it religiously for years on everything from commons to the rarest I got. Quote Link to comment Share on other sites More sharing options...
BigO Posted February 28, 2015 Share Posted February 28, 2015 (edited) Yep, glue stick. Thought it was a stupid suggestion years ago. Tried it anyway. Worked like a charm. Edited February 28, 2015 by BigO Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.