Fyrebird Posted May 12, 2015 Share Posted May 12, 2015 Don't know if this has been asked, but I have 3 power supplies for the TI. the huge wall wart one, and two of the newer ones with the brick in the middle, one has the extra extension on the plug, Which one should I use? they all have the same part number and seem to have all the same voltage, just don't want to destroy the system so I'm asking the experts here. Thanks for your help. Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted May 12, 2015 Share Posted May 12, 2015 All of them will work fine. The one with the extension on it has a fuse in the line, so that one has the safety check done to it. The wall wart that plugs directly into the wall didn't need the extra fuse. The one without the extension may be one that should have been modified with the extender, or it may be a version that already incorporated changes to make it unnecessary. All of them will work though. Quote Link to comment Share on other sites More sharing options...
Fyrebird Posted May 13, 2015 Author Share Posted May 13, 2015 figured they would all work, but never hurts to ask, thank you. Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.