bholcomb007 Posted May 28, 2015 Share Posted May 28, 2015 Hello all! I was interested in adding the 32K16 hardware project to my TI 99/4A and attempted to contact Richard Bell, but alas his email is old and no longer valid. The project is located here: http://www.mainbyte.com/ti99/32K16/32k16.html If anyone could aid in finding the parts list and schematics at the least so I could make my own board that would be super, and if anyone knows where to get the kit now, even better! Thanks in advance, Ben Quote Link to comment Share on other sites More sharing options...
Shift838 Posted May 28, 2015 Share Posted May 28, 2015 Ben, I will email Richard about this to find out if he has any of the parts or can provide the PCB schematics. Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted May 28, 2015 Share Posted May 28, 2015 Hello all! I was interested in adding the 32K16 hardware project to my TI 99/4A and attempted to contact Richard Bell, but alas his email is old and no longer valid. The project is located here: http://www.mainbyte.com/ti99/32K16/32k16.html If anyone could aid in finding the parts list and schematics at the least so I could make my own board that would be super, and if anyone knows where to get the kit now, even better! Thanks in advance, Ben Richard is here.. and I've been asking him about these for a while but he has been busy running for congress. I will ping again. Greg Quote Link to comment Share on other sites More sharing options...
Opry99er Posted May 28, 2015 Share Posted May 28, 2015 Hope he wins... I might just have to move to his district! 1 Quote Link to comment Share on other sites More sharing options...
Shift838 Posted May 28, 2015 Share Posted May 28, 2015 Greg, I already sent him an email.. Quote Link to comment Share on other sites More sharing options...
bholcomb007 Posted May 28, 2015 Author Share Posted May 28, 2015 Sweet! Thanks for the replies. I would hope we can recreate this wonderful modification. I look forward to hearing something about it! Ben Quote Link to comment Share on other sites More sharing options...
Swim Posted May 28, 2015 Share Posted May 28, 2015 Hi All, Greg and I have been working out getting the remaining SNUG 32-16 kits available for those interested but time for us to accomplish the task with my life taken over by a run for Congress over the past year and a half have kept us from succeeding. Now that the election has passed and I didn't win, my life is getting back to normal and I will be getting a package out to Greg within the next couple of weeks. The inventory is low but probably enough to easily meet the current demand of about half dozen kits. It will be up to Greg to decide if it's worthwhile to make another run of the boards and possibly move from a PAL device to a PLD device. SNUG (Michael Becker) has released the rights to me for the kit and there is no longer a modest license fee required. The kits are a high quality board and parts and should probably sell in the $40 range but Greg and I have not finalized pricing as we need to calculate current pricing of parts first. The SNUG 32-16 has more features than just adding the 32k to the 16 bit buss and I believe I have scanned the latest docs for it and have them on one of my old chip programming machines. I'll try to find them and post them here for all to see ASAP. 4 Quote Link to comment Share on other sites More sharing options...
bholcomb007 Posted May 28, 2015 Author Share Posted May 28, 2015 Thanks Richard, that makes me feel quite hopeful for obtaining the mod for my machine. Look forward to hearing back about it. I also have another friend that just got bitten by the TI bug (he is an atari fan from old) and he will be wanting one as well. Again, thanks for the reply and I look forward to the upgrade. Ben Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted May 29, 2015 Share Posted May 29, 2015 Hi All, Greg and I have been working out getting the remaining SNUG 32-16 kits available for those interested but time for us to accomplish the task with my life taken over by a run for Congress over the past year and a half have kept us from succeeding. Now that the election has passed and I didn't win, my life is getting back to normal and I will be getting a package out to Greg within the next couple of weeks. The inventory is low but probably enough to easily meet the current demand of about half dozen kits. It will be up to Greg to decide if it's worthwhile to make another run of the boards and possibly move from a PAL device to a PLD device. SNUG (Michael Becker) has released the rights to me for the kit and there is no longer a modest license fee required. The kits are a high quality board and parts and should probably sell in the $40 range but Greg and I have not finalized pricing as we need to calculate current pricing of parts first. The SNUG 32-16 has more features than just adding the 32k to the 16 bit buss and I believe I have scanned the latest docs for it and have them on one of my old chip programming machines. I'll try to find them and post them here for all to see ASAP. Woo! ok cool thanks for the update Richard and my condolences on the stupidity of New York voters.. ready when you are Greg Quote Link to comment Share on other sites More sharing options...
bholcomb007 Posted June 8, 2015 Author Share Posted June 8, 2015 Any word yet on the status of this Greg? Quite excited and ready to install this upgrade on my 99/4A! Ben Quote Link to comment Share on other sites More sharing options...
+OLD CS1 Posted June 8, 2015 Share Posted June 8, 2015 I tried donating directly to Richard's campaign, but it appears that you have to donate to the party which then distributes donations. Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted June 8, 2015 Share Posted June 8, 2015 Any word yet on the status of this Greg? Quite excited and ready to install this upgrade on my 99/4A! Ben Nope! I'll announce when I have something. Greg Quote Link to comment Share on other sites More sharing options...
JamesD Posted June 29, 2015 Share Posted June 29, 2015 Just bumping the thread because I'd like one of these upgrades. Quote Link to comment Share on other sites More sharing options...
bholcomb007 Posted June 29, 2015 Author Share Posted June 29, 2015 Thanks James! I have been wanting to do that as well...just always get too busy! Ben Quote Link to comment Share on other sites More sharing options...
bholcomb007 Posted August 17, 2015 Author Share Posted August 17, 2015 Just checking in on the status of the memory upgrade project Greg...any word from Richard? Thanks, Ben 1 Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted August 17, 2015 Share Posted August 17, 2015 Just checking in on the status of the memory upgrade project Greg...any word from Richard? Thanks, Ben nope! I'll ping him again! Greg Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted August 17, 2015 Share Posted August 17, 2015 As real estate fills up in my P-Box, I figure down the road I'm going to have to pull the TI 32K card and install memory in the console with all the other stuff I have stuck in there. I have to admit though, I've had my eye on Tursi's mod < HERE >> because I had read of some speed issues and incompatibilities with some software with the 32K on the 16 bit bus mod. But then again, this was clear back in 1989 when I last considered that option. Have things changed since then? Quote Link to comment Share on other sites More sharing options...
JamesD Posted August 17, 2015 Share Posted August 17, 2015 (edited) As real estate fills up in my P-Box, I figure down the road I'm going to have to pull the TI 32K card and install memory in the console with all the other stuff I have stuck in there. I have to admit though, I've had my eye on Tursi's mod < HERE >> because I had read of some speed issues and incompatibilities with some software with the 32K on the 16 bit bus mod. But then again, this was clear back in 1989 when I last considered that option. Have things changed since then? I thought this was switchable as to whether there were extra wait states or not and everything worked with wait states enabled. *edit* Now that I think about it, there may have been some issues with RAM at different locations in the scratchpad area. Edited August 18, 2015 by JamesD Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted August 18, 2015 Share Posted August 18, 2015 nope! I'll ping him again! Greg Richard has been unable to spend any time on this over the summer. He hopes to get to it sometime in the fall/winter I will definately post when I have new information. I know everyone is anxious but $#!+ happens and life takes priority over hobby fun. Having had that kind of summer myself I am totally understanding of Richard's priorities and ask you be patient and we'll get this figured out when we get it figured out.. Greg 1 Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted August 18, 2015 Share Posted August 18, 2015 yes, confirmed. patience is a totally accelerator not quick, but safe. Quote Link to comment Share on other sites More sharing options...
Tursi Posted August 19, 2015 Share Posted August 19, 2015 As real estate fills up in my P-Box, I figure down the road I'm going to have to pull the TI 32K card and install memory in the console with all the other stuff I have stuck in there. I have to admit though, I've had my eye on Tursi's mod < HERE >> because I had read of some speed issues and incompatibilities with some software with the 32K on the 16 bit bus mod. But then again, this was clear back in 1989 when I last considered that option. Have things changed since then? There are so few issues and incompatibilities with the 16-bit RAM that it's really not a consideration in whether you do it (the crystal change has larger impacts). It's worth the speedup! Only reason I developed my solution was I was tired of soldering so many wires. 2 Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted August 19, 2015 Share Posted August 19, 2015 Thanks Tursi. I doubt I'll ever mess with the XTAL speed up modification. I gotta draw the line somewhere. It already has Matthew's gadget and yours inside it, so with the inclusion on this other mod, three ought to be enough. 1 Quote Link to comment Share on other sites More sharing options...
papa_november Posted March 12, 2017 Share Posted March 12, 2017 (edited) Will there ever be any more of these boards produced? Is there anything else like it in the works? Edited March 12, 2017 by papa_november Quote Link to comment Share on other sites More sharing options...
Shift838 Posted March 12, 2017 Share Posted March 12, 2017 Will there ever be any more of these boards produced? Is there anything else like it in the works? If you are looking for a 32k option there is the new 32k sidecard by JediMatt HERE Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted March 13, 2017 Share Posted March 13, 2017 Will there ever be any more of these boards produced? Is there anything else like it in the works?32k sidecar as he linked you to and theres a 32k internal hack that is here under the title hardware project of the quarter. The sidecar is a lot less work and priced cheap. Sent from my LG-H830 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.