gamer2 Posted November 28, 2015 Share Posted November 28, 2015 I had an Atari ST 1040 STF given to me recently, and after getting RGB Scart cables from Ebay, I found that it is finicky with my RGB equipment, namely my two scalers. The only thing it displays on is my CRT TV through a SCART to Component transcoder, and the image has flutter, and the software I wrote to a disk runs but scrolls (no way to adjust vertical hold on my TV). I do have old VGA monitors, but I know that only displays in Monochrome. Aside from a CRT Display, a PVM/BVM which I can not locate due to me living out in the middle of nowhere, and a sc1224 Atari Monitor...what are my options to display RGB from this machine.I do have an old Apple 12" RGB Display, the low res (512x384) version from the Macintosh LC which I have in storage. Could I use that? Quote Link to comment Share on other sites More sharing options...
Xebec Posted December 2, 2015 Share Posted December 2, 2015 Not my video - but this appears to be a reasonably priced solution for outputting color to VGA monitors: The board (GBS8200) appears to cost around $25 USD from various sources. If you're willing to do some cable hacks, and can get packages shipped to the middle of nowheres, maybe this will help Good luck! P.S. Does the SC 1224 not work? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.