Jump to content
Posted Fri Jan 8, 2016 8:42 PM
Posted Fri Jan 8, 2016 9:20 PM
There is no latency for the keyboard's input. I am typing this post using the Adam keyboard and it is responding just as the keyboard on my laptop would respond. There is a longer pause when holding a key down but the key is repeating. We may be able to tune this. The location of the backspace is killing me but my memory just triggered and I remember how I would hit the backspace key in the 80's. I did not remember how my hands get a workout from typing on this keyboard!
The interface connects to the computer using a USB port and presents itself to the computer as an HID keyboard. This is why I was able to type on my laptop then the Adam keyboard. It should work on a Mac with no problem. I sold the Intellivision Ultimate Interface which is also an HID interface and it worked fine on a Mac.
Below is a better view of the interface. I am thinking that the interface could be sold like this if there are only a handful of people interested in it.
I do not think you will be able to get one in Janurary. I understanding wanting it now. It has been many years for me. Hang on a bit more...we are close.
Posted Fri Jan 8, 2016 9:24 PM
Posted Fri Jan 8, 2016 9:56 PM
Congrats on getting the interface working and looking forward to further updates and it's eventual availability. As far as the picture of the interface supplied above, will it remain a two PCB interface or will this be reduced to one and what's with the four phone cable connectors on the one PCB? I know one would be for the ADAMnet cable coming from the keyboard, but what's with the other three?
BTW, a case would be great, so hope you get enough interest to warrant one.
Posted Fri Jan 8, 2016 10:38 PM
Thanks NIAD. i would love to be able to answer your questions but will have to wait until we get closer to release. I would love to see it all on one PCB but if there are only 3 other people interested in this, the interface may be put together by hand and on two PCBs and no case. The way I look at it is, at least you can get one...or better.... at least I have one (hahahahaha).
Posted Sat Jan 9, 2016 4:12 AM
Well, if the price is around $40, I'd be interested in one, too. Looks great!
Posted Sat Jan 9, 2016 1:58 PM
If anyone has just the keyboard and is missing the cord to connect the keyboard to the Adam (or soon to be released interface), here is a link where you can buy a cable.
I bought one and it works perfectly.
I am thinking the interface could be installed inside the keyboard. We are still trying to figure this out....
Posted Sat Jan 9, 2016 3:22 PM
Would you be more interested in this interface if it supported the AdamNet so you could hook up a disk drive also? I would expect even less people to be interested in this as I do not know what software would be able to read the disk drive.
Posted Sun Jan 31, 2016 9:51 PM
Thomas, this is more for you.
It is not a great video but you see the keyboard in action and you can hear me "beating" on the keyboard. I showed it with Smart Writer as you see many keys working and I wanted to show it working on a Raspberry (not that you see the Raspberry).
Very little progress has been made beyond the prototype. I keep the keyboard connected and on all day with my Raspberry setup and this shows that the interface (and keyboard) are holding up well.
I am still not sure when/if you will be able to get one. I am hoping by summer but life is getting in the way.
Posted Sun Jan 31, 2016 10:17 PM
This working in RetroPie? I'm in!
Posted Sun Jan 31, 2016 11:54 PM
It works on the PC, Mac, Linux (Retropie), anything that accepts a USB HID (human interface device). I use it on my Windows system for testing and Retropie setup for playing.
Posted Mon Feb 1, 2016 12:23 AM
Posted Mon Feb 1, 2016 1:20 AM
I really want you to get an interface but there is only the one prototype and I am not letting it go
The plan is to make a few for those that want one. You are #1 on my list!
Posted Mon Feb 1, 2016 8:49 AM
Posted Mon Feb 1, 2016 9:41 AM
You can put me down as #2 on your list then!
Posted Fri Feb 12, 2016 8:20 AM
I now have the "finished" product. The prototype has been connected and powered on for weeks now and has been working flawlessly. I now need to do this same with this board. Once it passes the time test, a few should be able to be released. The prototype will become availalbe also.
I have yet to do this but this board should fit nicely inside the keyboard. I am hoping the usb jack fits nicely where the RJ-12 connector is.
Edited by intvdave, Fri Feb 12, 2016 8:21 AM.
Posted Fri Feb 12, 2016 11:23 AM
Posted Fri Feb 12, 2016 7:51 PM
Congrats on getting this far and look forward to reading further updates.
Posted Fri Feb 12, 2016 8:33 PM
Thanks. This is as far as we go with this. There are no plans for it to be a full AdamNet interface as there is little need to connect an Adam disk drive to a PC. Hopefully Thomas will have his interface by March. It only took 3 years Thomas but we are almost there!
Posted Sat Feb 13, 2016 5:55 AM
Well, if you are looking for a "fun" project, I don't think I'm the only one who would love to take a PC floppy drive (either a 5.25" or 3.5") and connect it to the Adam through the AdamNet.
Or better yet, a USB adapter to AdamNet so we can just plug in FAT-formatted thumbdrives.
Yes, I realize that's a humungous wish, but you never know unless you ask!
Posted Sat Feb 13, 2016 7:26 AM
Sorry LoTanah but I do not have an Adam Floppy drive which we would need to try to get the drive working with the interface. We considered the idea but, as you mentioned, it needs to be fun for me and possible. I did look to purchase a drive but it seems that they have not aged well so the task is even more challenging.
Lucky for me, and us (the 6 interested in the keyboard interface), the keyboard has aged well. I picked up 3 of them and they all work perfectly. I now keep my keyboard connected to my Raspberry PI in the living room with no complaints from the wife. We also use it to control Kodi
Posted Sat Feb 13, 2016 4:15 PM
I hope I'm still on the list! $20 is great, but I'd certainly pay up to double that if needed.
Posted Sat Feb 13, 2016 5:21 PM
I was thinking there might be more interest in the interface but it seem that there are about 6 people interested in it. I doubt the price will be $20. I am hoping it does not go over $50. At $50, we may lose some people but this is not about making money; just about people, including myself, enjoying the nostalgia. I am hoping for it to be available by the summer.
Posted Sat Feb 13, 2016 6:48 PM
Posted Sat Feb 13, 2016 10:49 PM
Thanks NIAD. I made a backup of the site also Are you considering hosting the information on your site?
0 members, 0 guests, 0 anonymous users