+the1hatman Posted June 14, 2016 Share Posted June 14, 2016 So most of you guys here are pretty smart, right? Could one of you please 3D print some Intellivoice shells in Intellivision II colors/style so I can just pop some old voice boards into them? I'll make a box or something for them Thanks! 2 Quote Link to comment Share on other sites More sharing options...
+JasonlikesINTV Posted June 14, 2016 Share Posted June 14, 2016 Here you go http://atariage.com/forums/topic/245871-sketch-up-renders-of-inty-iii-and-intellivoice-ii/ Quote Link to comment Share on other sites More sharing options...
JohnPCAE Posted June 14, 2016 Share Posted June 14, 2016 (edited) I posted some models I had made in FreeCAD a while back, but the problem is that the Intellivoice board won't fit in an Intellivoice II case. Everything is offset too far forward on the board. Part of the reason I did the NanoVoice project was to get around that, but so far I don't think anyone has ever made the NanoVoice board and tested it. http://atariage.com/forums/topic/212103-fun-with-freecad/page-2?do=findComment&comment=2769898 Edited June 14, 2016 by JohnPCAE Quote Link to comment Share on other sites More sharing options...
+fdr4prez Posted June 14, 2016 Share Posted June 14, 2016 I posted some models I had made in FreeCAD a while back, but the problem is that the Intellivoice board won't fit in an Intellivoice II case. Everything is offset too far forward on the board. Part of the reason I did the NanoVoice project was to get around that, but so far I don't think anyone has ever made the NanoVoice board and tested it. http://atariage.com/forums/topic/212103-fun-with-freecad/page-2?do=findComment&comment=2769898 I would like to make the NanoVoice, but it seems that many of the components on the Intellivoice are obsolete and/or only made for the Intellivoice, so you'd have to get an Intellivoice and strip it for parts; of which I don't have the budget for right now. Quote Link to comment Share on other sites More sharing options...
+fdr4prez Posted June 14, 2016 Share Posted June 14, 2016 Oh, and I did previously look around for 3D printing thread and couldn't find anything close to the correct color. Quote Link to comment Share on other sites More sharing options...
pimpmaul69 Posted June 14, 2016 Share Posted June 14, 2016 I would like to make the NanoVoice, but it seems that many of the components on the Intellivoice are obsolete and/or only made for the Intellivoice, so you'd have to get an Intellivoice and strip it for parts; of which I don't have the budget for right now. i offered a few time to people to take an ecs and an intellivoice and make an intellivoice ii with them. The label someone else would have to make though. Some people have non working ecs' and its a project ive wanted to do. Alas though nobody ever followed through on sending them to me. Quote Link to comment Share on other sites More sharing options...
+BBWW Posted June 14, 2016 Share Posted June 14, 2016 I am so lazy I haven't sent mine yet. LOL Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.