9phoneman Posted March 12, 2017 Share Posted March 12, 2017 My question is are the alternative controllers out there to replace an Intellivision 2 controllers. My are in not good coniditon. Despite being in the attic so long. The system is good but the controllers are shout? Thank you in advance. Quote Link to comment Share on other sites More sharing options...
+save2600 Posted March 12, 2017 Share Posted March 12, 2017 Can always purchase new Intellivision Flashback controllers (system comes free with purchase - haha) and adapters here for them. Much better solution than even a newer pair of Intellivision II controllers. http://atariage.com/forums/topic/237113-intellivision-flashback-controller-adapters-round-2/?hl=+adapter 1 Quote Link to comment Share on other sites More sharing options...
mr_me Posted March 12, 2017 Share Posted March 12, 2017 (edited) Ask Intellivision Productions if they plan on getting more controllers. Their store says sold out for a while now. https://intellivision-productions-inc.myshopify.com/ Best to find a cheap Intellivision Flashback on ebay as save2600 suggested. Any Intellivision controller can be used with any Intellivision system. There are three connector pinout standards. The original inline 9pin connector, the Sears/II DE-9 connector, and the Flashback DE-9. Only simple wiring adapters are needed to make them work; link provided in previous post. Edit: Old controllers can sometimed be repaired. Open them up and look for damaged plastic circuits. If it looks okay check for continuity in each of the nine wires in the cable. Opening Intellivision II controllers can be tricky without some direction. Edited March 12, 2017 by mr_me Quote Link to comment Share on other sites More sharing options...
Jinks Posted March 12, 2017 Share Posted March 12, 2017 How about int 1 controllers?? Quote Link to comment Share on other sites More sharing options...
mr_me Posted March 12, 2017 Share Posted March 12, 2017 How about int 1 controllers??If you want to use Intellivision 1 controllers on an Intellivision II, you just need a simple adapter like the $3 dongle being sold here. http://www.2600-daptor.com/Vision-daptor.htm Quote Link to comment Share on other sites More sharing options...
GenetixJ Posted March 15, 2017 Share Posted March 15, 2017 I opened one intv2 controller and broke the plastic side buttons. Not again if I can help it. Go with the flashback route, you won't regret it. Plus you'll have games on the flashback system to play on your modern TV. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.