ti99iuc Posted March 25, 2017 Share Posted March 25, 2017 (edited) Hello guys, reading this page i am curious to know if someone of you know this problem... https://www.cpsc.gov/Recalls/1983/texas-instruments-providing-adapter-for-ti-994a-computer someone can tell me about this problem please ? i'd like to understand it better in the history, TI stopped his production of TI-99/4A for this problem ? thanks Edited March 25, 2017 by ti99iuc Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted March 25, 2017 Share Posted March 25, 2017 I think this is the reason why the newer powersupplies (120V) have this "security feature" (with this green sign) Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted March 25, 2017 Share Posted March 25, 2017 Here is a (quick & dirty) list of 120 Volt PSU´s. The green tag means it has the "safety feature". The rest I have to check, so, this is not 100% TI-99-PowerSupplies-v1.16-120-VOLT-US.pdf Edith: I also have collected (and political correctly named) a mass of pics of each PSU I found Quote Link to comment Share on other sites More sharing options...
ti99iuc Posted March 25, 2017 Author Share Posted March 25, 2017 yes, i have the stuff--- But i'd like some more details on a reald true story for this problem... someone worked in TI maybe ? 1 Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted March 25, 2017 Share Posted March 25, 2017 yeah, this is the stuff I mean. Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted March 25, 2017 Share Posted March 25, 2017 But I prefer NOT to use that feature, so I never fall asleep in front of my console 1 Quote Link to comment Share on other sites More sharing options...
CC Clarke Posted March 26, 2017 Share Posted March 26, 2017 (edited) yes, i have the stuff--- 2017-03-25_214050.jpg 2017-03-25_213613.jpg 2017-03-25_213450.jpg But i'd like some more details on a reald true story for this problem... someone worked in TI maybe ? If memory serves me correctly, this problem came to light very early in the year (1983) when the transformers failed high pot testing (this is an extreme test where the secondary is intentionally shorted out and the primary (120vac) is left powered up. After about 45 minutes, (the exterior case would start to deform from the internal heat) the transformer would fry. I used to spend many nights doing this test, and they were very repeatable. US Underwriter's Laboratories had approved the transformer, but the Canadian (CSA I think it was called) Product Safety group flagged it as a potential problem if it wasn't grounded. The factory had to grind off the CSA stamp on the bottom of the transformers. (You can look at the bottom of one to see if it was affected by looking for the circular grinding marks.) I never heard of anyone getting zapped by their 99/4A, though I have repaired TI computers where you could feel a slight tingle when your wrist lightly brushed against the aluminum trim. Anyway, this was just another major public relations headache at a time when TI was reeling financially by trying to price-cut their 99/4A to compete with the lesser capable VIC 20 -instead of the comparable C-64, which coast more. I don't remember what it cost the company to recall all the outstanding transformers, but it wasn't cheap. Did it kill the 99/4A? No. But it did cast it in more of a negative light when it was under intense scrutiny to be profitable. J. Fred Bucey was a Lubbock native and CEO of the company then. He made the decision to pull the plug and left a lot of people unemployed in Lubbock during the fall of '83. I was lucky, and got out about six months before the axe fell. CC Edited March 26, 2017 by CC Clarke 5 Quote Link to comment Share on other sites More sharing options...
ti99iuc Posted March 26, 2017 Author Share Posted March 26, 2017 Oh really thanks for this explaination, it really was what i looking for !! <3 Thanks again Quote Link to comment Share on other sites More sharing options...
alortegac Posted August 22, 2018 Share Posted August 22, 2018 (edited) Hi! Sorry for this question. Do you know how to check the TI 99\4A power supply voltage with multimeter? I do not know which one I should use for ground or common. Thanks! Edited August 22, 2018 by alortegac Quote Link to comment Share on other sites More sharing options...
Stuart Posted August 22, 2018 Share Posted August 22, 2018 (edited) Hi! Sorry for this question. Do you know how to check the TI 99\4A power supply voltage with multimeter? I do not know which one I should use for ground or common. Thanks! http://www.mainbyte.com/ti99/hardware/power_supply.html Scroll down below the photos. Edited August 22, 2018 by Stuart Quote Link to comment Share on other sites More sharing options...
alortegac Posted August 23, 2018 Share Posted August 23, 2018 (edited) Hi, thanks for your reply. Checking if the trasnsformer cord, not the the power supply. It has 4 female jacks, one is not in use and the other 3 suppsed to have a voltage output when working correctly. Attached picture. I do not know how to check voltages on AC without a ground. When I measure with the red testing lead I do get voltages that do not match with the specs shown. Again, sorry for my basic question. Thanks a lot. Al Edited August 23, 2018 by alortegac Quote Link to comment Share on other sites More sharing options...
whicker Posted August 23, 2018 Share Posted August 23, 2018 I do not know how to check voltages on AC without a ground. When I measure with the red testing lead I do get voltages that do not match with the specs shown. If you measure a transformer's output voltage at the secondary coils, you will not see the numbers in the spec. An AC transformer will output much higher voltage on the secondary side if it is not connected to its intended load that is actively drawing power. This applies to any transformer, not just TI-99's. 1 Quote Link to comment Share on other sites More sharing options...
alortegac Posted August 23, 2018 Share Posted August 23, 2018 I see this. thank you,. I did not realize at the beginning this was only a transformer and power supply was internal. thanks again.! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.