SavageMind Posted March 26, 2017 Share Posted March 26, 2017 I have a four port 5200, with the sv-023 on the serial tag. The weird thing is the board appears complete but there is no place to plug the power into. There is no hole in the case with a adapter jack and when I opened her up the PS heat sink and CAP is there but no actual adapter port. Any clues? I picked it and a 2 porter for the price of shipping so I don't feel robbed but I'm wondering if this was a promo or display. If you notice the AV cable is also hard wired into the board vs others that I have seen connected via jack. Overview of board, Yeah it know it's dirty. Notice the hard wired cable. No power adapter connector and no hole! Same form a different angle. Funky Serial Any help would be great. Thanks Quote Link to comment Share on other sites More sharing options...
CPUWIZ Posted March 26, 2017 Share Posted March 26, 2017 You are missing the switch box. http://www.videogameconsolelibrary.com/images/Manuals/82_Atari_5200_4_port.pdf Quote Link to comment Share on other sites More sharing options...
+Ryan Witmer Posted March 26, 2017 Share Posted March 26, 2017 You are missing the switch box. http://www.videogameconsolelibrary.com/images/Manuals/82_Atari_5200_4_port.pdf I wish I'd seen this years ago, now I finally see how they intended for you to put the controllers in the storage bin! I've been doing it wrong the whole time! Quote Link to comment Share on other sites More sharing options...
sngwriting1 Posted March 28, 2017 Share Posted March 28, 2017 Lol! I never realized the controller cords were supposed to be wrapped around the the joystick either! Shows you how much I read manuals. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.