aftyde Posted April 2, 2017 Share Posted April 2, 2017 Hi All, Was tinkering with my HDX RS-232 card and seem to have blown away the DSR. The machine won't start with the interrupt jumper on - so my question is, what would be the correct process to reload the DSR. Do I need to tinker with this jumper? The only com program I have that works is Zterm80 - and it seems to require the interrupt jumper be on. So what is exactly the process... don't want to fry my one connection to the non-TI world... Cheers, Arthur... Quote Link to comment Share on other sites More sharing options...
Shift838 Posted April 2, 2017 Share Posted April 2, 2017 (edited) Hi All, Was tinkering with my HDX RS-232 card and seem to have blown away the DSR. The machine won't start with the interrupt jumper on - so my question is, what would be the correct process to reload the DSR. Do I need to tinker with this jumper? The only com program I have that works is Zterm80 - and it seems to require the interrupt jumper be on. So what is exactly the process... don't want to fry my one connection to the non-TI world... Cheers, Arthur... If I recall you need to remove the jumper to load the DSR. The Jumper is only needed when you are using a terminal program that requires interrupts. Check your battery to go ahead and makes sure it's still good too. Edited April 2, 2017 by Shift838 1 Quote Link to comment Share on other sites More sharing options...
Opry99er Posted April 2, 2017 Share Posted April 2, 2017 Just make sure you have the DSR on first and foremost. 1 Quote Link to comment Share on other sites More sharing options...
aftyde Posted April 2, 2017 Author Share Posted April 2, 2017 Got it! You guys rock! Much appreciated... Quote Link to comment Share on other sites More sharing options...
Shift838 Posted April 2, 2017 Share Posted April 2, 2017 Got it! You guys rock! Much appreciated... Awesome We Rock! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.