bradhig1 Posted June 3, 2017 Share Posted June 3, 2017 Is there any way to adjust the colors on the atari 2600 expansion module? They are not the same as my 2t600s. Quote Link to comment Share on other sites More sharing options...
NIAD Posted June 3, 2017 Share Posted June 3, 2017 No. You'll have to adjust the TV settings to get the colors you want when using the E.M.#1 Atari Adapter and then you'll have to change the color settings back for other uses. Quote Link to comment Share on other sites More sharing options...
ed1475 Posted June 3, 2017 Share Posted June 3, 2017 There is a dial on the E.M.#1 circuit board to adjust the RF colors. Not sure if it works for a CV with its video modded. Quote Link to comment Share on other sites More sharing options...
Hannacek Posted June 3, 2017 Share Posted June 3, 2017 Expansion Module 1 is a clone of the Atari. So just like in an Atari, there is a color tint potentiometer (CTP) that you can adjust to change the tint and color. The Colecovision has its own potentiometer that adjust the color for just the coleocivison. The best thing to do is adjust your tv settings with a movie or TV show first to get the colors of the TV accurate, and then if you need to adjust the potentiometers do that. Quote Link to comment Share on other sites More sharing options...
rednakes1 Posted June 6, 2017 Share Posted June 6, 2017 (edited) The pot is above the Atari cartridge slot. I have a picture here. EDIT: I believe you can access the pot even when the expansion module is not opened, and when plugged into the CV. Just use a screwdriver to adjust it. Edited June 6, 2017 by rednakes1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.