Unstablewarpfield Posted June 11, 2017 Share Posted June 11, 2017 (edited) For a while now I wanted to get RGB out of my Amiga CD32 to play it a bit more since I can connect it easier through my Framemeister that way. I chose not to do an internal mod, but make an expansion card for the expansion slot on the back of the console. I soldered up the long connector today and had a testrun. Beautiful RGB... Simon the Sorcerer... here we come! Edited June 11, 2017 by Unstablewarpfield 1 Quote Link to comment Share on other sites More sharing options...
boog Posted June 11, 2017 Share Posted June 11, 2017 Nice! I thought there were supposed to be resistors on the video lines to get the correct RGB brightness levels? Did you add resistors somewhere along the signal path or are you just wiring directly to the SCART connector? Quote Link to comment Share on other sites More sharing options...
Unstablewarpfield Posted June 11, 2017 Author Share Posted June 11, 2017 For now I wired everything directly and the image seems fine. Got myself a big beefy individually shielded scart cable. I might add some 75 ohms resistors on the rgb lines and see what that does. I could make future revisions and add the resistors on the board. Also VGA is a possibility :-) 1 Quote Link to comment Share on other sites More sharing options...
Sinphaltimus Posted June 11, 2017 Share Posted June 11, 2017 Nice. Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.