Virtua_ben Posted July 15, 2017 Share Posted July 15, 2017 Hey all!I've got a problem with my Jaguar AV signal. So, here's the nitty-gritty: The system is connected to a framemiester via an AV scart cable. Previously, I'd turn on the system and it would boot right up. Now (after moving), when the system boots up nothing shows up and there's no sound. A picture and sound *only* appears after unplugging the AV cable (with the system on) and plugging it back in. After that, it works perfectly! But every time the system is powered off, I have to go through this routine, and obviously that's a PIA. I've cleaned the contacts with isopropyl alcohol and even some brass cleaner, but the same problem persists. Any ideas? Quote Link to comment Share on other sites More sharing options...
Zerosquare Posted July 15, 2017 Share Posted July 15, 2017 Strange. Try turning on the Jaguar before the Frameister? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.