Zxquad Posted October 25, 2017 Share Posted October 25, 2017 Hi all, I need your help, I just bought a no working Coleco, the only problem is a missing cable between the working power supply and the coleco, I fix this but now I need to know where the +5 +12 -5 and the GND are located on the console's pins .... Could somebody here help me ? Quote Link to comment Share on other sites More sharing options...
carlsson Posted October 25, 2017 Share Posted October 25, 2017 (edited) Take a good look on the label on the power supply, or visit a page like this one: http://www.colecovision.dk/technical.htm Edited October 25, 2017 by carlsson 1 Quote Link to comment Share on other sites More sharing options...
Zxquad Posted October 26, 2017 Author Share Posted October 26, 2017 Mixed both ideas found on FB Colecovision Lunatics! and search a little more on the web http://www.colecovision.dk/technical.htm as you tells me , in fact we have to watch out with the colors. The white and the red are on both the same, but from the PS the yellow is to connect on the blue and the blue to the black on the coleco connector !!!! Now it's just perfect !!!! Thx a lot for your help too Anders .... Quote Link to comment Share on other sites More sharing options...
Zonie Posted February 14, 2018 Share Posted February 14, 2018 (edited) Does this diagram make sense to anyone??? From what I can tell here, on the power cord: wht +5 yel -v red +12 blu gnd ??? Edited February 14, 2018 by Zonie Quote Link to comment Share on other sites More sharing options...
ten-four Posted February 14, 2018 Share Posted February 14, 2018 It's a little tricky on the first picture. From CV PAL Power supply: 1 White, + 5v. 2 Yellow, - 5v. 3 Red, + 12 v. 4 Blue, Ground/common Power cord from CBS ColecoVision: 1 White, + 5v. 2 Blue, - 5v. 3 Red, + 12v. 4 Black, Ground/common Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.