+xucaen Posted January 11, 2018 Share Posted January 11, 2018 and a ferrite bead on the RCA cable to keep the picture clean and interference free on my 20" Sony KV-20FS120 WEGA Trinitron CRT TV. No photos of the ferrite bead on the RCA cable? 1 Quote Link to comment Share on other sites More sharing options...
LidLikesIntellivision Posted January 11, 2018 Share Posted January 11, 2018 When I joined the HSC, I only had stella to play Atari. Five years later, most of the time I play with the Atari 7800 hooked to a CRT TV and the Harmony Cart. My last CX-40 is broken, I should try to fix it using older ones since it's my favorite controller. Fortunately I have other options: Master System d-pad, Genesis d-pad and two moddified nes controllers (the standard d-pad and the arcade nes joystick). These nes controllers are great for 7800 games. Quote Link to comment Share on other sites More sharing options...
Skippy B. Coyote Posted January 12, 2018 Share Posted January 12, 2018 (edited) Yes Jin, very comprehensive thx! Probably a little excessively comprehensive in retrospect, but you're welcome none the less. As far as the question about using Xbox, PS2, etc. Atari compilation disks goes I think it will probably vary from game to game and disc to disc, since some have flawless emulation and others...well, not so much. When in doubt there's never any harm in asking. No photos of the ferrite bead on the RCA cable? You can actually see the bead on the RCA cable at the very top of the picture. Edited January 12, 2018 by Jin 1 Quote Link to comment Share on other sites More sharing options...
+xucaen Posted January 12, 2018 Share Posted January 12, 2018 You can actually see the bead on the RCA cable at the very top of the picture. Oh yeah! I see it now. Quote Link to comment Share on other sites More sharing options...
RJ Posted January 12, 2018 Share Posted January 12, 2018 Oh yeah! I see it now. Is that what that is? There's one on my PS2 digital optical out cable 1 Quote Link to comment Share on other sites More sharing options...
S.BAZ Posted January 15, 2018 Share Posted January 15, 2018 I'm still using my same woodgrain VCS that I started out in the HSC with. CX-40 (my favorite controller) Original carts whenever possible, otherwise the Harmony Cart! and that's it. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.