Xebec Posted December 9, 2017 Share Posted December 9, 2017 Electrical Engineering-wise -- how complex/difficult would it be to put a board inbetween an Atari 8bit motherboard and POKEY that intercepts the audio out and makes it available over bluetooth? Quote Link to comment Share on other sites More sharing options...
Rybags Posted December 9, 2017 Share Posted December 9, 2017 Check ebay "bluetooth audio transmitter" - cheap boxes already available that you could use, all that's needed is to provide the Atari audio to a 3.5mm plug which plenty of us do already. 1 Quote Link to comment Share on other sites More sharing options...
Level42 Posted December 9, 2017 Share Posted December 9, 2017 (edited) Exactly, but get a GOOD One or you will have lag which is terrible, especially with games and.....well in fact lag is always terrible. And also...audio conversion can be terrible. I bought this one from AliExpress with exactly the goal of streaming Stereo Pokey to my Bluetooth capable Onkyo receiver.....big failure. Not only did it produce hiss and distortion in the audio signal, it also had a lot of lag. http://s.aliexpress.com/n2IZnQZF I guess in this case it was too cheap to be true....would love to hear from someone who bought one with GOOD audio quality and (almost) no lag....it also needs to fit inside a 600XL Edited December 9, 2017 by Level42 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.