VicViper Posted January 3, 2018 Share Posted January 3, 2018 My outer shell for my Bread Box C64 has some damage, any good source for replacements? found some kind of kickstarter for colored shells, but they don't look available anymore. Quote Link to comment Share on other sites More sharing options...
carlsson Posted January 3, 2018 Share Posted January 3, 2018 (edited) I think some other people on the forum bought from this source, or a similar one. However those are C64C shells in various colours. Your motherboard will fit a C64C shell, but it won't be a breadbin anymore. https://shop.pixelwizard.eu/commodore-c64/ Of course you could try to find a broken C64 with intact shell, in case that is easier or cheaper these days when people seem to be asking $$$ for just a screw. Edited January 3, 2018 by carlsson Quote Link to comment Share on other sites More sharing options...
+OLD CS1 Posted January 3, 2018 Share Posted January 3, 2018 You know, that reminds me. I am still waiting for my new C64 key-caps along with my SX64-themed case. @VicViper: I have a few bread-bin 64s sitting around here. If you do not mind cleaning one up, I will pull the innards out and send you the case. Just cover the shipping. Quote Link to comment Share on other sites More sharing options...
VicViper Posted January 4, 2018 Author Share Posted January 4, 2018 You know, that reminds me. I am still waiting for my new C64 key-caps along with my SX64-themed case. @VicViper: I have a few bread-bin 64s sitting around here. If you do not mind cleaning one up, I will pull the innards out and send you the case. Just cover the shipping. You are a swell person. I'll send you a PM. Quote Link to comment Share on other sites More sharing options...
jjh76 Posted January 6, 2018 Share Posted January 6, 2018 How much damage is there? Is it just cracked or are there pieces broken off completely? Quote Link to comment Share on other sites More sharing options...
VicViper Posted January 6, 2018 Author Share Posted January 6, 2018 How much damage is there? Is it just cracked or are there pieces broken off completely? NAsty brown color, piece on the back is broke off. Quote Link to comment Share on other sites More sharing options...
jjh76 Posted January 7, 2018 Share Posted January 7, 2018 Where exactly did it break off from, and do you still have the pieces? If it's not too bad you might be able to stick it back together with some acetone - just use a q-tip to brush some on the edges and then hold the pieces together, being careful not to get any on the outside of the case as it will melt it. I did this with one of mine that was starting to crack at one corner of the keyboard and now there's just a barely visible line where the crack was. If you've got some old broken toy or something made from ABS then you can cut small pieces from it and stick it on the inside for reinforcement (if there's room for it where the break occurred) As for the color, there's always retrobright but I haven't tried it myself yet so can't really give any advice on that Quote Link to comment Share on other sites More sharing options...
norm8332 Posted January 7, 2018 Share Posted January 7, 2018 (edited) I have a motherboard but no case so if you get a replacement maybe you could send the old one to me. I'm about 100 mi from you in WNY. Edited January 7, 2018 by norm8332 Quote Link to comment Share on other sites More sharing options...
VicViper Posted January 9, 2018 Author Share Posted January 9, 2018 (edited) I have a motherboard but no case so if you get a replacement maybe you could send the old one to me. I'm about 100 mi from you in WNY. yes, I can swing that. Should cost about 15 bucks to ship to you, I'll PM you when I get the new one from OLD CS1. Edited January 9, 2018 by VicViper Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.