bradhig1 Posted January 31, 2018 Share Posted January 31, 2018 I cleaned the contacts and it says turn power off before inserted cartridge or expansion module. I have the black things on the circuit board in the cart facing the label is that the correct way the the board should be facing? Quote Link to comment Share on other sites More sharing options...
rodge2001 Posted February 2, 2018 Share Posted February 2, 2018 That should be correct; the black memory chips should face front/label side of cart which should face front of ColecoVision. After full insertion, turn power on and then try slightly pulling cart out just a smidge and then hit reset to see if that works. Might not be good for the system to do so while powered on but it can sometimes get a temperamental cart to work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.