+OLD CS1 Posted March 11, 2018 Share Posted March 11, 2018 I am trying to repair my TI Program Recorder which has very low audio output -- I believe a problem in the amplification circuit as it is putting out voltage but little audio. Does anyone know if a schematic exists for this animal? Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted March 11, 2018 Share Posted March 11, 2018 I ordered the service manual should be here next week isn't there another thread? Sent from my LG-H872 using Tapatalk Quote Link to comment Share on other sites More sharing options...
+OLD CS1 Posted March 11, 2018 Author Share Posted March 11, 2018 Yeah, but was for a different issue and I did not want to hijack that thread. BTW, this thing is a pain to take completely apart. The microphone cable will not allow you to lift the mechanism out, and even once you remove that the remaining wires, about six not including the motor switch wires, are very short and will need to be removed to get to the component side of the board. I sold what turned out to be my only working unit This one is the original one we purchased way back when so I am more motivated to fix it. 1 Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted March 11, 2018 Share Posted March 11, 2018 ok well I'll scan the manual when it gets here 1 Quote Link to comment Share on other sites More sharing options...
+OLD CS1 Posted March 11, 2018 Author Share Posted March 11, 2018 I will be very grateful. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.