82atari5200 Posted March 17, 2018 Share Posted March 17, 2018 I tested the output of the power supply and everything else is fine but Im getting 10v on the 5v line. Can the Coleco handle this? Secondly when I test it on the power switch, the 5v rail is not showing anything. Plan on cleaning or replacing switch. Just curious if the Coleco can pull down the 10v into 5v or need new supply as well. Quote Link to comment Share on other sites More sharing options...
nick3092 Posted March 18, 2018 Share Posted March 18, 2018 The voltage regulators are all in the power supply brick. So you should see pretty much exact voltage at the connector. If you are reading 10v at the connector on the 5v rail, then something is wrong in the power supply and you shouldnt attempt to power a console with it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.