Opry99er Posted May 17, 2018 Share Posted May 17, 2018 I have a very annoying flicker in my video. It is like a metronome... about every two seconds, the video flickers/darkens and then returns to its previous state. It doesn't affect timing or gameplay, and the flicker lasts just milliseconds, but (as you can imagine) it is very annoying. This behavior started when I unpacked my system after having moved to Wisconsin. When we lived in Tennessee, it worked beautifully. I had one television which I used for my 2600, my Intv, and my NES. I would swap the video cables out when I needed, etc. problem is, the woody has no power indicator light or anything, so I didn't notice when my kids switched the Atari on one day..... for two weeks..... I had the Intv plugged in, and never noticed. So, that was right before we moved, and I never tested the console there after noticing it. I just powered it off, unplugged it, and packed it. Fast forward to a couple months ago. I plugged the VCS in, and now have a flicker. Could it be a power supply issue? A TIA issue? I don't know enough about the VCS internals to be able to diagnose right off, but I'm reasonably handy with a multimeter and just need to know where to start looking. Anyone experienced this before? Thanks in advance! Quote Link to comment Share on other sites More sharing options...
Opry99er Posted May 17, 2018 Author Share Posted May 17, 2018 (edited) This is as close as I can find to a similar issue... but this is sort of the opposite in that it darkens rather than brightens. There was no resolution in this post, so I'll follow the plan laid out in this post to see if any of it helps. http://atariage.com/forums/topic/176101-2600-flicker-issue/ Edited May 17, 2018 by Opry99er Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.