Jump to content
IGNORED

arcade machines running windows wtf?


bradhig1

Recommended Posts

Not sure what the innards of that machine originally were, but I've seen this more and more in "barcades" and the like. As these machines are breaking down, I guess it's easier to just insert a PC/raspberry PI/60 in 1 as opposed to actually fixing the board.

Link to comment
Share on other sites

It's getting harder and harder to find people willing to repair the old boards. Often, there are collectors out there with the knowledge, but they don't usually have the time or patience to deal with more than their old machines. Also, it can cost anywhere from $50-$75 an hour to work on these machines. If the person working on it has to stop and scratch their head over an odd issue, the meter just keeps running and the cost keeps racking up. It can cost $200-$500 just to have a jukebox amp rebuilt in my region.

Link to comment
Share on other sites

Saw this at an AMC theater while waiting to see Jurassic World Fallen Kingdom. What is this an emulation machine?

 

Nope. The game runs under Windows. No, it's not a standard Windows installation and there are various protection methods and devices used in order to make running it on a regular PC difficult.

 

This has been happening for at least 15 years at this point - see the Taito Type X hardware for an example, though I think there were a couple of other arcade platforms doing this before that one.

  • Like 3
Link to comment
Share on other sites

If i recall correctly Cave CV1000D Hardware was the last non Window/Linux Arcade platform for mainstream Arcades and that was around 2012.

Really the last major arcade board before this was Naomi and PGM series and once they aged it was game over for Arcade centrist hardware

Link to comment
Share on other sites

  • 2 weeks later...

When I was at ACAM a few years ago one of the laser disc games was sitting at a Windows 2000 desktop. Apparently that one is running Daphne...

 

Speaking as someone who has owned a number of laserdisc games over the years, that's about the best way to make them reliable.

Link to comment
Share on other sites

I remember it going on back around 2000, at work they had Arctic Thunder on the floor at Midway and it had some issue at one point and we had it tore open and the PC was right there. I think it was some old Pentium box, not even a 1ghz yet at the time tech wise, and they did it on an earlier one too in the 90s with Hydro Thunder which I think ran on some miserable little 486 compatible.

Link to comment
Share on other sites

I remember it going on back around 2000, at work they had Arctic Thunder on the floor at Midway and it had some issue at one point and we had it tore open and the PC was right there. I think it was some old Pentium box, not even a 1ghz yet at the time tech wise, and they did it on an earlier one too in the 90s with Hydro Thunder which I think ran on some miserable little 486 compatible.

Hydro thunder ran on a celeron at a few hundred mhz, but still it was a pc running windows

Link to comment
Share on other sites

I never knew this about PC’s in arcade machines.

I knew they started using hard drives.

Seems natural that they would switch over completely to a computer motherboard.

PC’s were in bar top touch screens like Megatouch, way back to the 386 and 486.

 

I always wondered why arcade is home emulated on PC,

but Megatouch that runs from PC isn’t home emulated?

Nobody cares to preserve them?

The protection used has never been cracked?

Homes didn’t have a touch screen until recent tablets / phones / touch computers.

Megatouch does use a hardware key to block other uses.

Megatouch did make a Photohunt and then an HD version for iPad in the iTunes Store, but it’s no longer there, so must not have been profitable to the company.

 

MAME runs images from the arcade machines that use hard drive data...

 

I did know about recent bar-cades having MAME machines.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...