Willie1914 Posted September 13, 2018 Share Posted September 13, 2018 Hello everyone! I'm new to the forum, but have been programming my Ti-99/4a since the mid-80's. Recently I moved to a Windows-10 based laptop, and find NotePad / WordPad a bit frustrating to use when writing assembly programs -- in particular, managing the tabs! Can anyone recommend a replacement for these? I'm curious as to what others are using. Thanks in advance, Willie 1 Quote Link to comment Share on other sites More sharing options...
RickyDean Posted September 13, 2018 Share Posted September 13, 2018 (edited) Hello everyone! I'm new to the forum, but have been programming my Ti-99/4a since the mid-80's. Recently I moved to a Windows-10 based laptop, and find NotePad / WordPad a bit frustrating to use when writing assembly programs -- in particular, managing the tabs! Can anyone recommend a replacement for these? I'm curious as to what others are using. Thanks in advance, Willie I don't program in a non IDE environment, so I can't give you a good answer, but I would think that something like notepad++ would work. I do believe their is an added benefit to using NP++, someone here in the past has posted a plugin for NP++ to know your dealing with assembly, I believe. Edited September 13, 2018 by RickyDean Quote Link to comment Share on other sites More sharing options...
+OLD CS1 Posted September 13, 2018 Share Posted September 13, 2018 I don't program in a non IDE environment, so I can't give you a good answer, but I would think that something like notepad++ would work. I do believe their is an added benefit to using NP++, someone here in the past has posted a plugin for NP++ to know your dealing with assembly, I believe. in the Development Resources thread, under "Editors." 1 Quote Link to comment Share on other sites More sharing options...
TheMole Posted September 13, 2018 Share Posted September 13, 2018 I can definitely recommend Sublime Text, although it is quite expensive... https://www.sublimetext.com Quote Link to comment Share on other sites More sharing options...
Asmusr Posted September 13, 2018 Share Posted September 13, 2018 (edited) IntelliJ IDEA community edition with xdt99 plugins. It provides syntax highlighting, jumping to labels, renaming labels, etc. And it's free. Edited September 13, 2018 by Asmusr 4 Quote Link to comment Share on other sites More sharing options...
+adamantyr Posted September 13, 2018 Share Posted September 13, 2018 I use Textpad myself, I like it because I can set it up with a syntax file so it highlights all my assembly operands. You can use Textpad for free pretty much indefinitely, it just pops up a registration reminder once in awhile, but I bought a license for $30 because it's a good product and I want them to make some money on it. Quote Link to comment Share on other sites More sharing options...
+Lee Stewart Posted September 13, 2018 Share Posted September 13, 2018 Notepad++ for me! I have used it extensively to write the TMS9900 Assembler and Forth code for my fbForth 2.0 cartridge (see below). ...lee 3 Quote Link to comment Share on other sites More sharing options...
jrhodes Posted September 13, 2018 Share Posted September 13, 2018 Notepad++ if your on windows, if on linux, look into a program called Geany. Quote Link to comment Share on other sites More sharing options...
RXB Posted September 13, 2018 Share Posted September 13, 2018 I just use Windows Notepad, works fine. Tried others like Notepad ++ but I do not need 3000 features I would never ever use. Quote Link to comment Share on other sites More sharing options...
Willie1914 Posted September 13, 2018 Author Share Posted September 13, 2018 Thanks for the replies everyone. I'll follow-up on your recommendations. I appreciate the help! Regards, Willie Quote Link to comment Share on other sites More sharing options...
+OLD CS1 Posted September 13, 2018 Share Posted September 13, 2018 I do not need 3000 features I would never ever use. This is why I never got married. 6 Quote Link to comment Share on other sites More sharing options...
Shift838 Posted September 14, 2018 Share Posted September 14, 2018 Notepad ++ also has a TI-99 XB and Assembly Language file so it will detect syntax for both. 1 Quote Link to comment Share on other sites More sharing options...
danwinslow Posted September 14, 2018 Share Posted September 14, 2018 (edited) Notepad++ works well, and is free. You can get gVim (vi editor) if you are old school. You could try Atom, too, it's what the cool kids use nowadays. Also Eclipse. and then there is the WUDSN project here:https://www.wudsn.com/index.php/ide/installation *edit* Err, WUDSN is Atari, not user if it has support for TI stuff. Edited September 14, 2018 by danwinslow Quote Link to comment Share on other sites More sharing options...
atrax27407 Posted September 14, 2018 Share Posted September 14, 2018 If you want to program exclusively on the TI, you can use F'WEB and one of the text-to-program utilities. 1 Quote Link to comment Share on other sites More sharing options...
+InsaneMultitasker Posted January 19, 2019 Share Posted January 19, 2019 Has anyone come across an editor that doesn't treat the tab as anything but moving the cursor, like the typical TI editors? For assembly language programming I just want something simple - no using the mouse to re-position the cursor, no tab/space indentation, etc. Lately I find myself creating new files with the real hardware then moving them to the PC because all the PC editors I have tried have the same annoying traits. Quote Link to comment Share on other sites More sharing options...
retiredqwest Posted January 19, 2019 Share Posted January 19, 2019 (edited) I use this https://www.webuilderapp.com/for PHP and HTML editing. This has an evaluation period. May not be what you are looking for..... Edited January 19, 2019 by retiredqwest Quote Link to comment Share on other sites More sharing options...
+mizapf Posted January 19, 2019 Share Posted January 19, 2019 Do you want TAB to insert 7 spaces (instead of a TAB char)? I'm using jEdit for quite a long time now, and it is highly configurable, including tabbing. Quote Link to comment Share on other sites More sharing options...
+InsaneMultitasker Posted January 19, 2019 Share Posted January 19, 2019 Do you want TAB to insert 7 spaces (instead of a TAB char)? I'm using jEdit for quite a long time now, and it is highly configurable, including tabbing. I want TAB to reposition the cursor without inserting any tabs or spaces. Quote Link to comment Share on other sites More sharing options...
pixelpedant Posted January 19, 2019 Share Posted January 19, 2019 For stuff like that, on Windows, I'd usually just use an AutoHotKey solution, possibly with a toggle to turn it on and off. Could make it window-specific (only active when Notepad++ is the active window) or heck, even file/directory specific (only active when Notepad++ is the active windows and is working in a file somewhere within one's /TI99/ directory), but might make more sense not to, just binding it to a toggle (e.g., so that when one's conception of "TI input mode" is toggled on, it works anywhere - not just in Notepad++). Quote Link to comment Share on other sites More sharing options...
Opry99er Posted January 19, 2019 Share Posted January 19, 2019 Notepad++ works great for me. I use it for all my PC-side programming. The TAB function in Notepad++ moves the cursor to the next pre-set tab location, but it adds spaces between the end of the current location and the tab location. In Notepad++, I don't think you can move forward on an otherwise empty line without adding spaces... Those locations don't exist until they are populated with something... either a character or a space. I may be wrong, but that's my experience. Quote Link to comment Share on other sites More sharing options...
RXB Posted January 19, 2019 Share Posted January 19, 2019 Notepad ++ also has a TI-99 XB and Assembly Language file so it will detect syntax for both. Yea but for GPL is does not really offer anything for me. It attempts to use a C like syntax set up. Quote Link to comment Share on other sites More sharing options...
+InsaneMultitasker Posted January 20, 2019 Share Posted January 20, 2019 The TAB function in Notepad++ moves the cursor to the next pre-set tab location, but it adds spaces between the end of the current location and the tab location. In Notepad++, I don't think you can move forward on an otherwise empty line without adding spaces... Those locations don't exist until they are populated with something... either a character or a space. Good to know. I think I tried Notepad++ along with 5-6 others some months ago hoping one of them would suit my needs. so far no dice. I just want to use a keyboard, no mouse, while editing code. For stuff like that, on Windows, I'd usually just use an AutoHotKey solution, possibly with a toggle to turn it on and off. Could make it window-specific (only active when Notepad++ is the active window) or heck, even file/directory specific (only active when Notepad++ is the active windows and is working in a file somewhere within one's /TI99/ directory), but might make more sense not to, just binding it to a toggle (e.g., so that when one's conception of "TI input mode" is toggled on, it works anywhere - not just in Notepad++). This sounds interesting... Would you have any thoughts on how to create a toggle like this? Would it be something like binding tab to a specific number of 'right' arrows? I'll look into this next week. The only challenge I could see is what Opry99er brings up, in that most text editors won't move beyond the last character of the current line. Quote Link to comment Share on other sites More sharing options...
+mizapf Posted January 20, 2019 Share Posted January 20, 2019 I want TAB to reposition the cursor without inserting any tabs or spaces. Well, there is always the option to answer: "You don't really want that." Known from various discussion forums. Quote Link to comment Share on other sites More sharing options...
RXB Posted January 20, 2019 Share Posted January 20, 2019 I have to scroll up and down often and if you have seen the GPL code for RXB you would know it is way larger than any other project for the TI99/4A just source DV80 files on my SCSI drive: SRXB3 683 DV 80 (GROM3) SRXB4 716 DV 80 (GROM4) SRXB5 768 DV 80 (GROM5) SRXB6 526 DV 80 (GROM6) SRXB7 240 DV 80 (GROM7) Then you have XB ROMs: SOURCE1 821 DV 80 (ROM1) SOURCE2 869 DV 80 (ROM2) Quote Link to comment Share on other sites More sharing options...
cbmeeks Posted January 21, 2019 Share Posted January 21, 2019 Visual Studio Code is a great text editor with hints of an IDE. It's fast, open source and free. Plus it runs on Mac/Windows/Linux. If you've ever used Sublime Text, it will feel at home. Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.