Kyle22 Posted September 25, 2018 Share Posted September 25, 2018 What we need is a clearly labelled version that we know has the the most efficient skew and is the fastest possible version of the code. Quote Link to comment Share on other sites More sharing options...
+kheller2 Posted September 25, 2018 Share Posted September 25, 2018 What we need is a clearly labelled version that we know has the the most efficient skew and is the fastest possible version of the code. I thought there was a modified version using faster stepping already created in another thread. Quote Link to comment Share on other sites More sharing options...
+Nezgar Posted September 25, 2018 Share Posted September 25, 2018 I thought there was a modified version using faster stepping already created in another thread. A quick summary of recently discussed US Doubler ROM's: CRC32 4C53A1A8 - DavidMil's mystery EPROM ICD.BIN and UsDoubler_ok.bin on pigwa - For tandon mechs - Faster Stepping (5ms instead of 10ms head steps), backwards write precompensation (Enabled on Tracks 0-19 instead of 20-39) can corrupt your data, lacks some timeout and retry code, and uses a less efficient skew for regular SD format. (Whomever cobbled this together, what were they thinking???) Not recommended for use. - http://atariage.com/forums/topic/275166-one-last-eprom/?p=4060794 CRC32 605B7153 - Matches "Doubler_err.epr" and "Usdblr_err.rom" found on pigwa, my B&C EPROM, and kheller2's original EPROM ©85 "Rev. L". Awaiting final authentication from a mask ROM dump as per this thread that it is the same as this. CRC32 0C42C87B - Rev L US Doubler modified by slaker using corrected stepper motor phase encodings and shorter seek delays as found in the stock 1050 "WST R 5" ROM for WST mechs only - Awesome!!! - http://atariage.com/forums/topic/156462-1050-roms/?p=4061547 Future: I would love to see a patched USD ROM based on the CRC32 605B7153 "Rev. L" for Tandon drives that has only the improved 5ms stepping, but without the other bugs. Find an earlier original US Doubler ROM that might only support the WDC 2793 FDC, i.e. ©84 printed on the Mask ROM Quote Link to comment Share on other sites More sharing options...
Kyle22 Posted September 25, 2018 Share Posted September 25, 2018 (edited) We need clearly labelled ROMs for USD that are as fast as possible for the drive mech's. All I want to see are clearly labelled USD ROMS for Tandon and WST mechs. Edit: And clearly labelled for 2793 and 2797 support. Edited September 25, 2018 by Kyle22 Quote Link to comment Share on other sites More sharing options...
+Nezgar Posted September 25, 2018 Share Posted September 25, 2018 We need clearly labelled ROMs for USD that are as fast as possible for the drive mech's. All I want to see are clearly labelled USD ROMS for Tandon and WST mechs. Edit: And clearly labelled for 2793 and 2797 support. Do you have any USD ROM images that don't match the 3 CRC's above? Quote Link to comment Share on other sites More sharing options...
Kyle22 Posted September 25, 2018 Share Posted September 25, 2018 I am sorry, but I do not. That's why I was looking to find clearly defined ROMS for the various controllers and mechanisms. I would like to see them archived in a place so everyone can find the one they need. 1 Quote Link to comment Share on other sites More sharing options...
+Nezgar Posted January 29, 2019 Share Posted January 29, 2019 We need clearly labelled ROMs for USD that are as fast as possible for the drive mech's. All I want to see are clearly labelled USD ROMS for Tandon and WST mechs. Edit: And clearly labelled for 2793 and 2797 support. Just reviewing this old thread... For quick reference, these are posts with the two current 'best / trusted' US Doubler ROM's: Tandon (Made in Singapore) - http://atariage.com/forums/topic/156462-1050-roms/?p=4061547(Original ICD code) World Storage (Made in Hong Kong) - http://atariage.com/forums/topic/156462-1050-roms/?p=4061547(minor patch of above for faster WST stepper) Both ROMs support 2793 and 2797 controllers. 2 Quote Link to comment Share on other sites More sharing options...
Kyle22 Posted February 3, 2019 Share Posted February 3, 2019 Just reviewing this old thread... For quick reference, these are posts with the two current 'best / trusted' US Doubler ROM's: Tandon (Made in Singapore) - http://atariage.com/forums/topic/156462-1050-roms/?p=4061547(Original ICD code) World Storage (Made in Hong Kong) - http://atariage.com/forums/topic/156462-1050-roms/?p=4061547(minor patch of above for faster WST stepper) Both ROMs support 2793 and 2797 controllers. This should be made STICKY. It is so good. :) Quote Link to comment Share on other sites More sharing options...
Mclaneinc Posted November 3, 2019 Share Posted November 3, 2019 On 2/3/2019 at 3:08 AM, Kyle22 said: This should be made STICKY. It is so good. Whilst its very interesting I don't think it will beat sex, which is also sticky... 1 Quote Link to comment Share on other sites More sharing options...
manterola Posted March 25, 2023 Share Posted March 25, 2023 I found this ICD RAM and ROM inside of one of my 1050s (WTS) made in Hong Kong. I was wondering if there is some interest in dumping the ROM using the Brown Cartridge method. Regards! Quote Link to comment Share on other sites More sharing options...
manterola Posted March 26, 2023 Share Posted March 26, 2023 On 9/24/2018 at 11:17 PM, Nezgar said: CRC32 605B7153 - Matches "Doubler_err.epr" and "Usdblr_err.rom" found on pigwa, my B&C EPROM, and kheller2's original EPROM ©85 "Rev. L". Awaiting final authentication from a mask ROM dump as per this thread that it is the same as this. @Nezgar. I used an old Pacman cart and I got the US Doubler firmware from the masked ROM. (I deleted the first 6 bytes after the extraction) It is the same CRC32 than the one mentioned in your quote. I am uploading it together with a text file with the mark in the chip, just in case it is needed. As can be seen in my previous post, this was found in Hong Kong version 1050, with 2793 controller. Not sure how good it works, but it made my computer boot with DOS 2.5. I still need to try SDX with skew and DD, to see if it really works well with this WS 1050. ICD USDoubler Firmware USD5185-2L.zip Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.