Jump to content
IGNORED

Drive light stays on after powering on Apple iic?


Recommended Posts

Do you have an Apple II formatted floppy disk in the drive ? If the disk drive is empty, or if the disk is not formatted for an Apple II, that’s what it normally does, though the screen should say “Apple //c” at the top while it is doing that...

 

If you hit Ctrl-Reset when it is doing that, it should drop you into AppleSoft BASIC with a ] prompt. Does it do that?

Link to comment
Share on other sites

I do have a bootable disk that works fine on another Applie iic and it will not load (I have also cleaned the drive head). If I do not have a disk in the drive on that system it says the same thing but then the drive stops spinning. On the 'bad' Apple iic the drive spins continuously. I swapped drives and still the same outcome with the good drive.

Link to comment
Share on other sites

  • 4 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...