Wanted Download link SAM,s Card Software and Memory tester

[TI998owner]

Hi Group,

Need a little help. Can someone provide a hyper link to

The system software and Memory Tester ver 4.0 for the

SAM,s Card. Just completed one of my 512k Boards.

,

Works very good as standard 32k, now need to setup

The rest.

Thanks in advance

TI998owner Lee

[RickyDean]

Do you have a FinalGrom99?

[+Ksarul]

Here's a link to the current version of the AMSTEST software. The thread it is in also has all of the AMS software at other points in the thread. You might want to start at the beginning and read it all, as there is a lot of good information in there.

[TI998owner]

HI JIM,

THANK YOU FOR THE REPLY BACK, AND THE INFORMATION

ON THE OTHER THREAD. VERY INTERESTING READING AND

MANY GOOD DOWNLOADS,

,

ONE QUESTION I READ WAS ABOUT WHAT HAPPENED TO

SEVERAL OF THE ORIGINAL SAMS BOARDS FROM MIKE DUD

,

I PURCHASED ( 5 ) OF TE ORIGINAL RUN FROM HIM BACK IN

2015 OR 2016 . SO FAR HAVE ONLY BUILT ( 2 ) OUT OF THE BUNCH.

,

ALSO ANOTHER POST , SOME HOW , SOMEONE MIXED UP LISTINGS

ABOUT ME AND MY TI998 COMPUTER ( WITH THE ) ARMADILLO FLAT

CARD EDGE BOARD. I STILL OWN BOTH CARDS AND THE COMPUTER.

,

TO RICKY DEAN, NOPE , I DONOT OWN A FINALGROM CART YET.

BUT THAT IS ON MY TOO DO LIST

,

THANKS AGAIN FOR THE HELP

TI998OWNER LEE

[+Ksarul]

I'm glad the data in that thread was able to help you out, Lee. Glad you still have the flat cable Armadillo Interfaces too! That is the only 99/8 card I don't have yet.

 

I kept prodding Mike to locate the boards he had from that run and put them into circulation, as the interest in SAMS boards was building and I wanted to make sure he had an opportunity to sell them. His bulk buy was one major reason the 2004 release occurred--and I didn't want him to remain sitting on them when I released an updated board in 2016. He did track them down and get them into circulation too, so now there are about 80 more SAMS boards in the community--20 from Mike and 60 that I've had made). The update only added side tabs and an LED circuit, so the boards are functionally identical, although future versions may actually be more. I have 10 more that are sitting on my bench right now (assembled this past weekend) that just need to have all of the chips inserted into the sockets for their burn-in test. I'll keep making more for as long as the community needs them.