electronizer Posted March 1, 2019 Share Posted March 1, 2019 I recently got an Apple II+ with a clone of the Saturn 128 memory card installed. I have it connected via composite video out to a modern LCD TV. With the memory card installed, there is a lot of red and blue color bleed around text on the screen, and a bunch of vertical blue dashed lines that are continually pulsating. Without the memory card, the text is crystal clear. Interestingly, whenever I load a program on disk, the bad text and vertical lines clear up while the disk drive is running, then come back. Bad: Good (while disk is running): Is there any way to fix this? Should I find an official Apple 64k upgrade card and replace the clone Saturn card? Do I even need a memory upgrade? Im guessing yes because a lot of the games Id want to play probably require 64k. Quote Link to comment Share on other sites More sharing options...
Aunty Entity Posted March 1, 2019 Share Posted March 1, 2019 Power issue, if it comes good while accessing the Floppy?? Quote Link to comment Share on other sites More sharing options...
R.Cade Posted May 30, 2019 Share Posted May 30, 2019 (edited) Something is causing the color killer to not engage properly. The older revision of Apple II board you have, the worse this usually is... Edited May 30, 2019 by R.Cade Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.