Jump to content
IGNORED

Logic level shifter <-> additional SIO pins to connect?


E474

Recommended Posts

Hi,

 

Pretty much all of the logic level shifters I have seen can shift 4 signals, and also connect Ground and +5volts (so 6 connections in total). The diagrams for the designs I have seen also connect Data In, Data Out and Command, but that leaves 1 signal unused. Has any made a mod/interface which connects up an additional SIO connector pin, e.g. Audio In, etc.?

Link to comment
Share on other sites

The use of level shifters is usually to allow 'real' hardware to work with things like SDrive-Max, the pins that are not used in the shifter circuit are

for Cassette control, Audio and the +12V line, so without an SIO breakout, there would be no way to connect a cassette in this setup.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...