Lumpy01

Using 'COM3' as serial port. Showing logs: [20:27:07][20:27:07] [20:27:07]--~--~--~-- [20:27:07]FujiNet 0.5.d4cb81e3 2021-02-24 05:19:32 Started @ 4 [20:27:07]Starting heap: 4056764 [20:27:07]PsramSize 3917592 [20:27:07]himem phys 4456448 [20:27:07]himem free 4456448 [20:27:07]himem reserved 262144 [20:27:07]FujiNet Hardware v1.0 [20:27:07]SPIFFS mounted. [20:27:07]E (1253) vfs_fat_sdmmc: mount_to_vfs failed (0xffffffff). [20:27:07]SD mount failed with code #-1, "ESP_FAIL" [20:27:07]fnConfig::load [20:27:07]fnConfig::load read 305 bytes from config file [20:27:07]WIFI_EVENT_STA_START [20:27:07]disk MOUNT [20:27:07]ATR MOUNT [20:27:08]mounted ATR: paragraphs=5760, sect_size=128, sect_count=720, disk_size=0 [20:27:08]Creating a default printer using FS_SPIFFS storage and type 1 [20:27:08]SSH client initialized. [20:27:08]ModemSniffer::ModemSniffer(FS_SPIFFS) [20:27:08]SIO SETUP [20:27:08]Set HSIO baud from 0 to 67431 (index 6), alt=68209 [20:27:08]Available heap: 3969852 [20:27:08]Setup complete @ 461 (457ms) [20:27:20][20:27:20] [20:27:20]--~--~--~-- [20:27:20]FujiNet 0.5.d4cb81e3 2021-02-24 05:19:32 Started @ 4 [20:27:20]Starting heap: 4056764 [20:27:20]PsramSize 3917592 [20:27:20]himem phys 4456448 [20:27:20]himem free 4456448 [20:27:20]himem reserved 262144 [20:27:20]FujiNet Hardware v1.0 [20:27:20]SPIFFS mounted. [20:27:20]E (1253) vfs_fat_sdmmc: mount_to_vfs failed (0xffffffff). [20:27:20]SD mount failed with code #-1, "ESP_FAIL" [20:27:20]fnConfig::load [20:27:20]fnConfig::load read 305 bytes from config file [20:27:20]WIFI_EVENT_STA_START [20:27:20]disk MOUNT [20:27:20]ATR MOUNT [20:27:20]mounted ATR: paragraphs=5760, sect_size=128, sect_count=720, disk_size=0 [20:27:20]Creating a default printer using FS_SPIFFS storage and type 1 [20:27:20]SSH client initialized. [20:27:20]ModemSniffer::ModemSniffer(FS_SPIFFS) [20:27:20]SIO SETUP [20:27:20]Set HSIO baud from 0 to 67431 (index 6), alt=68209 [20:27:20]Available heap: 3969852 [20:27:20]Setup complete @ 463 (459ms) [20:27:25] [20:27:25]CF: 00 31 53 00 00

Using 'COM3' as serial port. Showing logs: [19:11:22]BUTTON_B: LONG PRESS [19:11:22]ACTION: Reboot [19:11:22]Shutting down device 5a [19:11:22]Shutting down device 43 [19:11:22]Shutting down device 50 [19:11:22]Shutting down device 40 [19:11:22]Shutting down device 99 [19:11:22]Shutting down device 45 [19:11:22]Shutting down device 70 [19:11:22]disk UNMOUNT [19:11:22]disk UNMOUNT [19:11:22]disk UNMOUNT [19:11:22]disk UNMOUNT [19:11:22]disk UNMOUNT [19:11:22]disk UNMOUNT [19:11:22]disk UNMOUNT [19:11:22]disk UNMOUNT [19:11:22]Shutting down device 5f [19:11:22]Shutting down device 78 [19:11:22]Shutting down device 77 [19:11:22]Shutting down device 76 [19:11:22]Shutting down device 75 [19:11:22]Shutting down device 74 [19:11:22]Shutting down device 73 [19:11:22]Shutting down device 72 [19:11:22]Shutting down device 71 [19:11:22]Shutting down device 38 [19:11:22]Shutting down device 37 [19:11:22]Shutting down device 36 [19:11:22]Shutting down device 35 [19:11:22]Shutting down device 34 [19:11:22]Shutting down device 33 [19:11:22]Shutting down device 32 [19:11:22]Shutting down device 31 [19:11:22]All devices shut down. [19:11:22]WIFI_EVENT_STA_STOP [19:11:22]Shutdown handler called [19:11:23][19:11:23] [19:11:23]--~--~--~-- [19:11:23]FujiNet 0.5.d4cb81e3 2021-02-24 05:19:32 Started @ 4 [19:11:23]Starting heap: 4056764 [19:11:23]PsramSize 3917592 [19:11:23]himem phys 4456448 [19:11:23]himem free 4456448 [19:11:23]himem reserved 262144 [19:11:23]FujiNet Hardware v1.0 [19:11:23]SPIFFS mounted. [19:11:23]E (1253) vfs_fat_sdmmc: mount_to_vfs failed (0xffffffff). [19:11:23]SD mount failed with code #-1, "ESP_FAIL" [19:11:23]fnConfig::load [19:11:23]No config found - starting fresh! [19:11:23]WIFI_EVENT_STA_START [19:11:23]disk MOUNT [19:11:23]ATR MOUNT [19:11:23]mounted ATR: paragraphs=5760, sect_size=128, sect_count=720, disk_size=0 [19:11:23]Creating a default printer using FS_SPIFFS storage and type 1 [19:11:23]SSH client initialized. [19:11:23]ModemSniffer::ModemSniffer(FS_SPIFFS) [19:11:23]SIO SETUP [19:11:23]Set HSIO baud from 0 to 67431 (index 6), alt=68209 [19:11:23]Available heap: 3969820 [19:11:23]Setup complete @ 460 (456ms) [19:11:32] [19:11:32]CF: 00 ff c0 00 00 [19:12:47][19:12:47] [19:12:47]--~--~--~-- [19:12:47]FujiNet 0.5.d4cb81e3 2021-02-24 05:19:32 Started @ 4 [19:12:47]Starting heap: 4056764 [19:12:47]PsramSize 3917592 [19:12:47]himem phys 4456448 [19:12:47]himem free 4456448 [19:12:47]himem reserved 262144 [19:12:47]FujiNet Hardware v1.0 [19:12:47]SPIFFS mounted. [19:12:47]E (1253) vfs_fat_sdmmc: mount_to_vfs failed (0xffffffff). [19:12:47]SD mount failed with code #-1, "ESP_FAIL" [19:12:47]fnConfig::load [19:12:47]No config found - starting fresh! [19:12:47]WIFI_EVENT_STA_START [19:12:47]disk MOUNT [19:12:47]ATR MOUNT [19:12:47]mounted ATR: paragraphs=5760, sect_size=128, sect_count=720, disk_size=0 [19:12:47]Creating a default printer using FS_SPIFFS storage and type 1 [19:12:47]SSH client initialized. [19:12:47]ModemSniffer::ModemSniffer(FS_SPIFFS) [19:12:47]SIO SETUP [19:12:47]Set HSIO baud from 0 to 67431 (index 6), alt=68209 [19:12:47]Available heap: 3969820 [19:12:47]Setup complete @ 471 (467ms) [19:13:35]CF: 00 f8 31 53 00

So, I picked up a FujiNet a few months ago and finally got the time to play around with it. I didn't get very far. It just doesn't boot. Things I've tried so far: Every conceivable button combination. The serial logs when booting while connected to the latest flash utility tell me nothing. I successfully flashed it to the latest firmware with no impact on booting. I tried it with a 5v USB power supply attached even though I read it's not necessary on the 130XE's. I get the same results on two different 130XE's. I tried it on a 1200XL (with the 5v SIO fix) with the same results. I know it's probably something simple. What the heck am I doing wrong? Video attached. Pay no attention to the portly shiny-headed reflection in the monitor.? FujiNet.mp4

This is what I paid for two shipped to NY. Ouch!

I'm in for a gold 800 board, NTSC.

One more for the wait list please. Thanks!

Well, that was it. I was typing "Uflash" instead of "Uflash.xex". Who would've thought it would fire up some old version of Uflash when called without the xex extension? Definitely a learning experience. Anyway, everything detected and flashed perfectly when I used the proper version of the flasher. Many thanks to all who helped. FJC, you really are an amazing programmer. This new BIOS is a thing of beauty.

Hey FJC. I was upgrading from your previous 2nd gen release not from the original 1st gen BIOS. That's why I'm so baffled. Uflash managed to flash all three roms perfectly just a couple months ago. Not sure what to do now.

So I attempted flashing my Incognito's three roms with FJC's latest release but I always get an invalid file signature error when I do the bios. Also, the OS rom names are garbled in the display. I'm using the Uflash that is included with his latest December release. The other two roms flashed fine. It's just the bios that's giving me a hard time. Any ideas?

My 1040STE has left & right RCA audio ports on the back so I used an RCA to 3.5mm headphone adapter/cable and ran it to some amplified computer speakers.

No speakers in the NEC. It would've been nice though. Saves some desktop space.

When using a Best VGA cable, I can verify the NEC LCD1970NX supports all three resolutions nicely on my 1040STE. Unfortunately, the earlier mentioned Mitsubishi E85LCD (Same panel?) only handles high resolution. The Mitsu does have a neat secondary VGA input which should work nicely with another Best cable, an Ambery box and a VGA switch for providing the low & medium resolutions. But unless I've missed something, it does not natively support all three resolutions like its NEC cousin.

Well FJC, the diagnostics don't work, none of the four XL/XE slots work and when I try and flash them (latest version of Uflash) I get a garbled mess on my screen. Colleen modes work fine and I did successfully flash the latest Beta BIOS, PBI and SDX 4.47 but something wacky happened somewhere. Sorry about the glare from my shop lights in the pic...

So after much playing with FJC's new Inconito BIOS/PBI releases as well as counless re-reflashing of various OS's, my Incognito is FUBAR. Time to fire up the new USB burner and flash it back to stock. Anybody have the most recent 512K (FULL) flash for it? Preferably the latest one Candle shipped? Lump

http://pages.ebay.com/link/?nav=item.view&alt=web&id=171871199900&globalID=EBAY-US http://pages.ebay.com/link/?nav=item.view&alt=web&id=171871181703&globalID=EBAY-US