Jump to content

c0d3m4st4's Photo

c0d3m4st4

Member Since 14 Dec 2007
OFFLINE Last Active Jun 4 2018 10:26 AM

#3837947 FS: 3D printed cases (FinalGROM99, FlashROM99, NanoPEB, C4CPC...), Tapuino

Posted by c0d3m4st4 on Wed Aug 30, 2017 3:22 PM

arcadeshopper.com has received a small amount of FinalGROM 3D printed cases, interested US buyers keep an eye on his website for stock updates ;)




#3823986 The FinalGROM 99

Posted by c0d3m4st4 on Wed Aug 9, 2017 2:33 AM

Glad you like it :)

 

Hopefully that was nothing serious and he/she is fully recovered!

 

Cheers!




#3812450 The FinalGROM 99

Posted by c0d3m4st4 on Sun Jul 23, 2017 1:15 PM

I am interested in those buttons.  Are the dimensions the same as a standard TI shell?

 

Darryl

 

Mostly... but not sure about thickness right now as i modified it manually inside to be able to fit the connector next to the SD card socket, so mine will fit but they may be too loose if you turn the case upside down, or may be pressing the push button all the time. They are just button caps sitting on the push button itself.

Attached Files




#3809934 The FinalGROM 99

Posted by c0d3m4st4 on Thu Jul 20, 2017 4:35 AM

For those interested, my FinalGROM 99 3D printed case is ready.

 

IMG_20170720_111215.jpg IMG_20170720_111248.jpgIMG_20170720_111300.jpg IMG_20170720_115844.jpgIMG_20170720_120232_1.jpg




#3809933 FS: 3D printed cases (FinalGROM99, FlashROM99, NanoPEB, C4CPC...), Tapuino

Posted by c0d3m4st4 on Thu Jul 20, 2017 4:24 AM

3D printed case for FinalGROM 99 ready!




#3806245 FS: 3D printed cases (FinalGROM99, FlashROM99, NanoPEB, C4CPC...), Tapuino

Posted by c0d3m4st4 on Sat Jul 15, 2017 12:04 PM

I'd just like to say, as the designer of Jedimatt42's 32k memory expansion board for the TI-99/4A, these 3D printed cases for it are great! 

 

I would have suggested one design change, and that would be to have the LED window in the front.

 

Regardless, c0d3m4st4, your work is excellent. Thanks! 

 

-M@

 

I was thinking exactly of that for the new FinalGROM99 case... LEDs are bright enough to be seen even if they are 1 or 2 cm inside the case.

 

Glad you like the one for your awesome board :)




#3805751 The FinalGROM 99

Posted by c0d3m4st4 on Fri Jul 14, 2017 3:45 PM

Cases are being made by the guy in Spain that makes the flashrom and nanopeb cases

Sent from my LG-H830 using Tapatalk

 

That's me! :P

 

Anyone interested, keep an eye on my marketplace thread in my signature.




#3802652 The FinalGROM 99

Posted by c0d3m4st4 on Mon Jul 10, 2017 5:07 AM

Is there any chance to print case for this module? I don't have spare to use it for FinalGROM.

 

I will do it for myself as i don't have any spares either, so yeah, will put some for sale when i'm done. Design will be similar to my FR99 case, just shorter to fit the new PCB design (cheaper too).

 

Feel free to check my FS thread in a couple weeks or so.

 

Cheers!




#3768017 FS: 3D printed cases (FinalGROM99, FlashROM99, NanoPEB, C4CPC...), Tapuino

Posted by c0d3m4st4 on Tue May 23, 2017 5:13 PM

Sorry to announce shipments to the USA are definetly over unless you are willing to pay for full insurance and are ready to wait for months until f***ing USPS decides to act as a proper company and not a piece of shit.




#3663896 FS: 3D printed cases (FinalGROM99, FlashROM99, NanoPEB, C4CPC...), Tapuino

Posted by c0d3m4st4 on Tue Jan 3, 2017 7:07 PM

This guy does great work!  I'm eagerly anticipating the third case from him (the 32K case model) and if it's anything like his other cases I know I'm gonna love this one too.  

 

I don't know about other folks, but I personally DETEST hardware that is unprotected and out in the open.  Not only do they protect my stuff, they also add some additional class to my classic computer setup.

 

Thank you for your kind words --- Ω --- :) Always good to read good feedback :)

 

Postage cost updated.... shipped the first parcels in 2017 and just found out they increased postage worldwide as usual :( All paid orders have been shiped with stated postage cost when purchased... all future orders will be with updated postage cost.

 

Cheers! :)




#3659912 FS: 3D printed cases (FinalGROM99, FlashROM99, NanoPEB, C4CPC...), Tapuino

Posted by c0d3m4st4 on Thu Dec 29, 2016 6:41 PM

did you base your turbo everdrive off of this?

http://www.thingiver...om/thing:458337

I've printed this and it's a nice cover

 

nope... that's remixed from some other design i took a look at the time. Those ones need to be modfied for the TED with USB port.

 

I created my own one for the USB version TED, which i later modded to remove the USB socket by request. That's why i offer both versions, i initially only offered the USB version as that was the TED i had.




#3659052 32k expansion for the side port - released

Posted by c0d3m4st4 on Wed Dec 28, 2016 3:52 PM

;)
 
IMG_20161218_170328.jpg IMG_20161218_165202.jpg




#3658953 FS: 3D printed cases (FinalGROM99, FlashROM99, NanoPEB, C4CPC...), Tapuino

Posted by c0d3m4st4 on Wed Dec 28, 2016 1:03 PM

For those who still prefer to purchase on eBay, i've moved all my 3D printed stuff to a new account: c0d3m4st4_3d

The other account was shared with a friend, and we were short of free monthly listings, so i decided to move all my 3D printed stuff to a new one :P Same items, support, quality and communication, only low feedback for now.. hopefully that will change soon :)

http://www.ebay.es/usr/c0d3m4st4_3d


IMPORTANT NOTES:

UPDATE: seems transit times to the U.S. are shorter now (finally!), still not as fast as last year, but all parcels should be there in 15 days max, let me know if not received in 15 days after i send you the tracking number.

- Shipping to Mexico and South America, absolutely at your own risk. Unacceptable customs delays in most cases, and some unexpected returns for no reason. If returned (safe, of course) i will only refund 80% of the item cost, but won't refund the postage cost. If declared lost, i will only refund whatever compensation the Spanish postal service offers (this is the amount payed for postage + a small compensation).

- U.S. buyers can purchase from www.arcadeshopper.com when he has stock available


Hey there.

Some of you may already know me or even purchased from me on eBay or the Ti99 forum.

I'm listing here all my 3D printed cases from now on offering cheaper prices (item + shipping) than on eBay (no eBay fees, no PayPal fees).

Only shipping once or twice a week... mostly mondays and fridays, but not always... (kinda random shipping days :D ) so please, be patient... max you will wait before getting a tracking number is 5 working days.


Please note, due to the manufacturing process (home 3D printing with non-professional equipment) cases might have imperfections here and there... but they will do the job. 3D printing is not comparable with mold injection :(

Payments should be made by PayPal (in euro) using the send money to friends/family option (if you have PayPal funds or bank account linked to your account, if no funds and only credit card linked to your account, final price will be increased in 3.5% + 0.35 which is the PayPal fee).


All cases include screws when needed.

3D printed case for FinalGROM 99 - 17.50 euro

4 colours available: green, white, orange and black. Design as pictured (for color options, please check FlashROM 99 case until i get some cases printed in the other colors). All cases include two 3D printed buttons in green and orange colors for the reset buttons (if you prefer them both in the same color, please, let me know when you contact me to purchase). Necessary screws included as usual.

This one is for the fully assembled PCB including LED and push buttons.

SD card inserts completely in the case... not an inch is left outside. I took the pics with it "ejected" from the socket.


IMG_20170720_111215.jpg IMG_20170720_111248.jpgIMG_20170720_111300.jpg IMG_20170720_115844.jpgIMG_20170720_120232_1.jpg



3D printed case for FlashROM 99 - 20 euro

--- Ω --- blog entry for this case HERE

4 colours available: green, white, orange and black. Design as pictured. All cases include 3 x 3D printed buttons in different colours, one matching your case, and 2 random ones to test where to sand or cut the plastic post in the button to match your reset switch height.

IMG_20161218_164714.jpg IMG_20161218_164724.jpg IMG_20161218_164731.jpg IMG_20161218_164741.jpg IMG_20161218_164836.jpg


3D printed case for NanoPEB v1 - 20 euro

IMPORTANT: Please double check to make sure your NanoPEB is the same i used to design these cases. Check with these pics, or contact me including a pic of yours to make sure it is the same model if you have any doubt, as i've seen different models of v1 floating around.
--- Ω --- blog entry for this case HERE

Available in black color only at least for now, i don't have much stock of other color filament.
Since it seems there are many versions of these devices, please, check following pictures with measures and exact model to make sure yours will fit in the case. Ask me first if you have any doubt.

nanopeb1.jpg nanopeb2.jpg nanopeb3.jpg nanopeb4.jpg

IMG_20161228_212342.jpg IMG_20161228_212355.jpg IMG_20161228_212406.jpg IMG_20161228_212413.jpg IMG_20161228_212425.jpg IMG_20161228_212439.jpg


The rough surface near the switch is caused because this is printed upside down and need a support structure in that area, so first layer is not very well done :( This is the only way to go to make it easier and faster to print, and getting a plain surface on the front.

Slide-in lid to access CF card, works quite well. Please note if you have big fingers you will still have some problems to extract the card properly, you can lift it a bit (there is extra room for that) to make it easier.

3D printed case for CF7 - 20 euro

IMPORTANT: Please double check to make sure your CF7 is the same i used to design these cases. Check with these pics, or contact me including a pic of yours to make sure it is the same model if you have any doubt, as i've seen different models floating around.

--- Ω --- blog entry for this case HERE

Available in black color only at least for now, i don't have much stock of other color filament.

Since it seems there are many versions of these devices, please, check following pictures with measures and exact model to make sure yours will fit in the case. Ask me first if you have any doubt.

cf7_1.jpg cf7_2.jpg cf7_3.jpg cf7_4.jpg

IMG_20161228_214105.jpg IMG_20161228_214115.jpg IMG_20161228_214124.jpg IMG_20161228_214129.jpg IMG_20161228_214136.jpg IMG_20161228_214143.jpg


The rough surface near the switch is caused because this is printed upside down and need a support structure in that area, so first layer is not very well done :( This is the only way to go to make it easier and faster to print, and getting a plain surface on the front.

Slide-in lid to access CF card, works quite well. Please note if you have big fingers you will still have some problems to extract the card properly, you can lift it a bit (there is extra room for that) to make it easier.

Thanks to schmitzi for sending me CF7 and NanoPEB so a case could be made.

3D printed case for jedimatt42 32K expansion - 15 euro

--- Ω --- blog entry for this case HERE

4 different designs for top cover (plain, with logo, plain with window for expansion port, or with logo and window). Snap-in lid to cover the expansion port window in case you don't want to use it for now but you go for the window version for future use). Fits nicely. Will include an extra lid just in case, as it is the weakest part (should be good for normal use, but no doubt it will degrade and fall if you keep inserting/removing it a lot).

IMG_20161218_165028.jpg IMG_20161218_165041.jpg IMG_20161218_165048.jpg IMG_20161218_165109.jpgIMG_20161218_170328.jpg


3D printed case for Amstrad C4CPC flash cart - 12 euro

Mod of the original case to replace the weak tabs with screws and fix text for FDM 3D printers. Available in creamy white color only.

IMG_20160603_104759.jpg IMG_20160603_104803.jpg IMG_20160603_104826.jpg IMG_20160603_104919.jpg



3D printed shell for Turbo Ever Drive v1.x flash cart - 5 euro

With or without USB socket. Suitable for PCB revs. 1.x (not suitable for v2!). Available colors: gray, creamy white, orange, dark green.

IMG_20150616_143421.jpg IMG_20150616_143739.jpg IMG_20150616_193034.jpg IMG_20151228_105309.jpg



3D printed case for MATEOS burner / dumper - 9 euro

This is a redesign of my previous version. Now with screws. Available colors: gray, creamy white, orange, dark green. Suitable for PCB rev. 1.4

IMG_20161213_202503.jpg



Fully assembled Tapuino - Commodore 64/VIC20/C16 datasette emulator - 50 euro

Allows you to load .TAP files (tape backups) directly from a microSD card (not included).

You can also save your own programs and copy to/from tape by connecting a real datasette to the port on the back.

Fully assembled in a screwless 3D printed compact case.

Upgradeable firmware. I can flash it in your desired language (English, Spanish, German, Italian or Turkish).

Basic usage instructions included (in English or Spanish only).


Professionally made PCB.

For C16 compatibility, you need an adapter, which i haven't built, so i haven't really tested C16 compatibility, but it is in the firmware and project docs, so guess it should work.


IMG_20170325_132639.jpgIMG_20170325_132647.jpgIMG_20170325_132722.jpgIMG_20170321_005721.jpgIMG_20170321_005741.jpg



Fully assembled SD2Vita adapter + 3D printed shell - 10 euro

Eject mechanism working. Fits perfectly in PSV-1000 model (OLED) , you can close the lid. Almost perfectly in PSTV.. you can't close the lid completely, but almost! xD Untested on PSV-2000

IMG_20170826_201750.jpg


More cases coming soon ;)


Shipping cost (everything is shipped from Spain):

I always ship boxed, and with tracking number. Sometimes the tracking numbers do not work with some postal services around the world, as i ship as "letter" to keep it cheap, and it seems they don't scan them on arrival, so contact me after 15 days if you haven't received your parcel so i can claim and they can start investigating the issue with your postal service. 2 weeks should be enough to arrive to U.S.A. but it may take up to a month (even more) for Asia and Australia.

I ship to most destinations, but not all, so contact me to check if i will ship to your country if not listed below.

Postage prices updated on Jan 1st, 2018
- To Japan / Australia / USA / Other countries :
Up to 100 grams: 7.50 euro
Up to 500 grams: 14 euro



- To Europe:
Up to 100 grams: 6.50 euro
Up to 500 grams: 10.50 euro



Feedback:

Please, when your items arrive, it will be good if you can leave your feedback here, so everyone knows how i'm doing.Thanks.

http://atariage.com/...5013-c0d3m4st4/



If you have any problem or question about with your item, contact me first!




#3652488 32k expansion for the side port - released

Posted by c0d3m4st4 on Sat Dec 17, 2016 4:35 PM

Yep, that's the method I used. I bet you're correct about the sounds. I've been told I have ham hocks for hands, the strength of Brutus and elegant grace of a raging elephant.

So I backed off.

I feel better now about giving it another go. I was afraid everything would explode in to a million pieces right in my hands.

:)

 

Same happened to me.

 

Just do what jedimatt42 suggested... do it slowly. Nothing should break. Happens often with brand new connectors... shoul dbe better after some use.

 

Good luck :)




#3559528 TI Related -- Ebay / Heads Up Notice

Posted by c0d3m4st4 on Tue Jul 26, 2016 11:17 AM

Thanks to OLD CS1, I now have a storage case for my FR99 that fits PERFECTLY.

Sometimes the simple things in life give one pleasure too.

 

gallery_35324_1027_456852.gif

 

Thanks again!

 

Those cases were made for my shell, don't you think so ? :P If you place the LED on top of the shell it will fit even better.. at least in the case i use, otherwise it will be a bit loose and move up and down when you shake it.