Jump to content

Ataritard

Members
  • Posts

    288
  • Joined

  • Last visited

  • Days Won

    2

Ataritard last won the day on July 11 2011

Ataritard had the most liked content!

About Ataritard

  • Birthday 03/01/1975

Profile Information

  • Gender
    Male

Recent Profile Visitors

9,316 profile views

Ataritard's Achievements

Moonsweeper

Moonsweeper (5/9)

80

Reputation

  1. That's a bad spot. If you could find the right shade of permanent markers, you could color over the scuff...
  2. I appreciate the advice guys. I emailed X-Arcade people a few weeks ago stating I bought this second hand and they offered a full set of replacement rollers and bearings for $15 which is fair but I really don't need the whole set. I'll call them when I get a chance and see if if they offer any other options. If not I'll take Tombstone up on his offer for one of his spare rollers. Thanks again.
  3. Does anyone know what brand of trackball X-Arcade uses? Happ? Imperial? Are they all the same? Ebay has them for $7.69. I could go that route.
  4. I need one of the long rollers... Inside the trackball there are three rollers. Two long ones and One short one. I figure it's worth a few bucks if anyone's got an otherwise defective trackball and could harvest one of the rollers out of it for me. I'd really appreciate it! There are bearings and encoder wheels but I don't need any of that. Thank you.
  5. I'm not suggesting you try and play the game with a digital stick. Just calibrate the pots by putting the crosshairs in the middle of the screen. Dig Dug is a good choice. Once he stops moving you are good. Though keep in mind each game might have a slightly different sweet spot for each pot.
  6. I like all of them though I believe the CX-80 has a better build quality than the CX-22.
  7. Out of the 4 ways to turn analog to digital, I really only understand the one I mentioned. Help me out. Can paddle support be added to the other three? Also, Can someone post a link to the 4052 Mitch linked to?
  8. The angle of the 72 pin connector determined where the cart stuck out and its orientation. I didn't want to do a bunch of soldering. The RF shield I completely removed and thank you, I appreciate the kind words, though you lost me at famicom I've got pictures of a third one I did where the cart comes out the bottom so the NES is upsidedown if anyone wants to see.
  9. This http://www.atarimuseum.com/videogames/consoles/5200/2600on5200.html is another way to do it.
  10. I like the idea of replacing the fire buttons. They do suck. Good luck with the optocouplers.
  11. If the buttons only work with a bit of pressure you can peel the tape and the silver cap up and clean the connections on the board itself. As for the left and right movement. Do you have any other games to test with? You said you didn't have any other controllers so it's tough to say.
  12. I like where Rex Dart is going with this. Touching pins 3 and 4 with a small screw driver should start a game...
  13. The Turnin' Turbo Dashboard is a nice touch.
×
×
  • Create New...