bandit

This has nothing to do with the one being sold, but do some of you guys remember ATV and B&C closing them out for $14.95 ? Also Those did not have shrink wrap ?>?

I Soldered Tips to fit 1050 and 1200XL's ,as the tips were Larger

Kjman Bought a large lot of 1200XL's and 1050's, but very few power supplys, he bought a big lot of 1027 power supplys at $1.00 each and they worked fine. 60W, 40VA 9.5VAC

The AtariMax 8meg cartridge works, I have made a few of these for 400 users.

Was tested and works, Will be sent in priority mail Flat Rate box. $45 Shipped. US Only

That's Sad, Shipping The 800's is Not easy.

16VAC For a 600XL or 800XL . That would cook it up good .

I had one and used it , Played with the Drawing ect... BUT! the best was making Disk directory's In the MINI font, Today I need a magnifying glass to see them Also, Boil water, use Strainer so only steam hits them, works unless there Realy Hard.

Once again . https://www.ebay.com/itm/145555940253

No way could I do what you did, That looks like it's never been bumped !! As the Heat goes, I have had my 800 since Christmas 1980 And The longer it was on the hotter it got, I removed the Memory Covers and that helped, but it still got warm. back in 2012/2013 I installed the Incognito board, so all the normal cards were removed, this things runs cool after being on all day.

I read your other post, Still looks like an 800 !! Good job

Save this for someone

If you already did this, ignore. Had a hard time finding this, anyway about 5 years ago someone needed this, someone told him do not use it, but it fixed the problem. I post this on your post , anyway if you did it I will edit post . Members 3,188 posts Location:Lublin, Poland Report Posted January 3, 2013 ok, as promissed, here is a bios update that takes care of cartridge issue you need to have SDX enabled while flashing (that doesn't mean you have to use it, just have to enable it since all flashers works through sdx cartridge banking register) and after it loads, wait untill normal (the same as it was while loading) screen appears - do not even think of pressing reset button ealier or turning off the machine after flashing is done, please turn off your computer and make sure that flasher won't be executed at power up (if you're loading it through SIO device) now you can use your cartridges normally maybe someone could make a better instructions or video on how to do it i would link them up to incognito page (there is one, just WIP, so i don't have it linked to the main page yet) well, this is all for today hopefully i'll have some more time tomorrow, so i could finnish with installation manual and overall pages bios-update.xex 17.13 kB · 156 downloads bios-update.xex

Candle came out with a Patch for the Cartridges, not sure for yours but I would check and see, it's here on AA That was for the first run boards

My 32g had the NAND error, The white ones are safe, and remember the memory is for downloading and saves, no longer can you download from Nintendo. I like the same games on WII-u better than the switch games converted.