Jump to content

malers

Members
  • Posts

    30
  • Joined

  • Last visited

malers's Achievements

Space Invader

Space Invader (2/9)

0

Reputation

  1. I am searching for the Coleco.rom which works in OpenEmu 2.01. Any Idea?
  2. Just for the records: The super card pro can copy the super archiver disk. /Michael
  3. Hello, did anyone compile a8rawcon on MacOS (Yosemite)? Thanks Michael
  4. Hi, i am searching for the bitwriter add on for super archiver for the 1050. Best
  5. Just for the records: The SA can copy early EA Titles (MULE, Archon I, 7 Cities of Gold,...). For Synapse and later EA titles you need the Bit Writer supplement which makes the 1050 able to copy the 34 Sector tracks. Currently I only know two titles which are not copyable with SA/BW combination. It is Spy vs Spy 2 (UK-Version) and the SuperArchiver-Disk. Of course, there might be more....
  6. Hello, it is now working. I got my third 1050 with super archiver. Using this one with super archiver 3.12(skew) produces working copies of this protection scheme. Important is using the same 1050 for reading and writing when you use skewing in the super archiver. My 1050 with super archiver and bit writer supplement is now able to copy everything except spy vs spy 2 uk version and the super archiver disk. Both use quite advanced protection schemes. Regards Michael
  7. Hello, for some reason I am not able to copy the early Electronic Arts copy protections (double sector 41 and track skewing) with the super archiver. MULE and Archon I fail to load after skew check. Happy Enhancement is able to copy those, what is quite interresting. I use super archiver 3.12 (skew) and I tried it with 2 different super archiver 1050. I also tried it with version 3.02 with skew parameter on. Is there somebody, who copied EA titles with the super archiver successfully? Could it be, that i am using a PAL 800XL ? (timing) Thanks in advance for any hint Michael
  8. Hello, just for the ones with asimilar issue. The speed pot board with 3 speed pots is another variant of the bit writer. The additional speed pot just replaces the Super Archiver speed pot. The 4 black wires of the 3 speed pots have following destinations when the Super Archiver speed pot is removed. The black wire not comming from a diode on the speed pot board goes to 2917 chip pin 10 within the 1050 drive. Its the same location as for the super archiver speed pot wire. 3 black wires are comming from the three different diodes on the speed pot board. the black wire for the 20kOhm pot goes to the 6523 located at U7 in the 1050 drive pin 23. The other two black wires ( both from 50kOhm pots diodes ) go to the 8621 (EF6821P) chip on the bit writer board. One to pin 19 and one to pin 39. Best Michael
  9. Hello, I am searching for somebody, who is able to modify my panasonic JU 475-5 drive in order to support flippy disks according to the video-tutorials on youtube. Of course, I ll pay well for all efforts. Thanks in advance Michael
  10. Hello, I am searching for the "bit writer" supplement for the super archiver for a 1050 drive. Best Michael
  11. Would be a pleasure, to upload dumps in a public place. But I thinks one of SPS people should create the public place and do some communication. That should not take a lot of time.
  12. Which 360K drive is in your opinion the best one for writing with kryoflux? The C64 people should face the same problem, dont they?
  13. What are the exact options for DTC-tool for copy protected Atari 8 bit disks, which create the stream-files SPS needs? I think most copy-protected disks are SD/SS, 40 Tracks, 128 Bytes per sector, 18 Sectors per track. The protection itself can be of course long tracks, short sectors, fuzzy sectors, bad sectors.....
  14. What could I personally do to support SPS to support Atari 8 Bit on their side? I already wrote a request to SPS, asking about status on A8 plattform...
  15. Thanks. Then, in my opinion, Kryoflux is not off high value for Atari 8 Bit world. I hope, that the The Software Preservation Society will support producing IPFs for Atari 8 Bit soon. Is it a manual process which they do for Amiga, Spectrum,.... or is it already sth automatical? And must it be done for each disk?
×
×
  • Create New...