Jump to content

flaggskull

Members
  • Posts

    27
  • Joined

  • Last visited

Recent Profile Visitors

1,925 profile views

flaggskull's Achievements

Space Invader

Space Invader (2/9)

20

Reputation

  1. Hmmm. I'm using dumper 1.1.0.9. I get the load failed message most of the time; however, a couple of times it went to a blank screen. I wonder what could be going on....
  2. Aardvark and Cave-In both work for me with 1.1x-r2.
  3. I have the green board HERO2 cart and still cannot get it to boot on the 2600+. Using the latest dumper and 1.1x-r2. Not sure the board has anything to do with it?
  4. Make sure both difficulty switches are set on (b) for Tower Toppler. Works great for me with update.
  5. The Left difficulty switch turns autofire on and off in Astroblast.
  6. I saw this on one of my facebook groups. He is currently looking for a process to unbrick his console. https://www.facebook.com/groups/143156022413203?hoisted_section_header_type=recently_seen&multi_permalinks=7173404869388248
  7. I have the same results. John may not have tested the game with Paddles. Might be the same problem TAC-SCAN has with using the paddles in the right port.
  8. Yes, I have had the same results with ARTI (Using the HOKEY) not playing music. However, my homebrews of Super Circus and Crystal Quest with real POKEY chips play music just fine.
  9. Oh Good! I didn't realize that. Thanks for the info. And the Evercades now update via wifi except for the first one which has had it's final update (Except perhaps custom firmware i.e. everSD). I'm sure they'll fix the problem Ben has already commented on it!
  10. It is a known problem which I hope they address in the next update. I have read about people bricking the Atari Gamestation Pro so I am a little concerned about the next update for that machine.
  11. I have not been able to get this to work.
  12. My Realsports boxing does not work after update. Displays a rolling scrambled picture.
  13. Yes, I had the same problem. Have you updated an Evercade handheld or Atari Gamestation Pro on the same computer? If so, I believe that is the problem. I finally was able to update on a laptop that I had not used to update any other system. I think the Atari 2600+ is using the driver provided for the other systems unsuccessfully. I have not figured out how to get the driver changed so the Atari uses the right one. If you have access to another PC that was not used to update another console, I would try that first.
  14. Astroblast works with the Paddle controllers but not the Joystick controller. Start the game with the fire button on the paddle. It is the only Atari game that I know of that can use either Joystick or Paddle and it somehow detects which is plugged in. I think that must be the problem on the 2600+. The game is WAY BETTER with the paddle anyway!
×
×
  • Create New...