flaggskull

No need for apologies. I appreciate your work on this. I have a list of games that I was slowly putting on the gsp. Now, I will be using your tool to initially transfer the bulk of them over. I will then add a number of Homebrews and any others not included in your list. Lastly, I'll go into the .ini file and tweek and/or add game descriptions and control instructions and modify any artwork more to my liking. Still a lot of work but you definitely saved me a ton of time. Thanks so much. Meanwhile, I have been sifting through all of the games in your build and so far they have all worked fine. My favorites include most of the Activision titles, namely HERO, River Raid, Robot Tank, Megamania, etc. All to be included in my final build.

I have the exact same problem using Windows 11. I was finally able to get the GSP to update when I used the cut/paste method into a backup game.ini file on my SD card. Thanks for the tip!

Hmmm. I'm using dumper 1.1.0.9. I get the load failed message most of the time; however, a couple of times it went to a blank screen. I wonder what could be going on....

Aardvark and Cave-In both work for me with 1.1x-r2.

I have the green board HERO2 cart and still cannot get it to boot on the 2600+. Using the latest dumper and 1.1x-r2. Not sure the board has anything to do with it?

Make sure both difficulty switches are set on (b) for Tower Toppler. Works great for me with update.

The Left difficulty switch turns autofire on and off in Astroblast.

Good to know. Thank you.

I saw this on one of my facebook groups. He is currently looking for a process to unbrick his console. https://www.facebook.com/groups/143156022413203?hoisted_section_header_type=recently_seen&multi_permalinks=7173404869388248

I have the same results. John may not have tested the game with Paddles. Might be the same problem TAC-SCAN has with using the paddles in the right port.

Yes, I have had the same results with ARTI (Using the HOKEY) not playing music. However, my homebrews of Super Circus and Crystal Quest with real POKEY chips play music just fine.

Oh Good! I didn't realize that. Thanks for the info. And the Evercades now update via wifi except for the first one which has had it's final update (Except perhaps custom firmware i.e. everSD). I'm sure they'll fix the problem Ben has already commented on it!

It is a known problem which I hope they address in the next update. I have read about people bricking the Atari Gamestation Pro so I am a little concerned about the next update for that machine.

I have not been able to get this to work.

My Realsports boxing does not work after update. Displays a rolling scrambled picture.