Hello ...
I think this is the right "thread" to ask about this : Here is previous post--->
I am having TIPI "software" issues.
For one thing, I cannot get the "TIN_A" software (TI Monopoly , written for the SAMS AMS memory card) to "boot"...
I think it is "reading" some of the files, but, I always get "I/O error 0" before it fully loads. Also, when this happens
it always causes any other programs I try to run with the same "I/O error 0"!?!
ALSO...I tried running the "Editor/Assembler" EDITOR ---> it loads and runs;
I then try "Editor/Assembler" ASSEMBLER --->it fails with "I/O error 0" then;
I try running EDITOR again--->it fails with (see above).
Does anyone else have this/these problems with TIPI?
>>post the Log file please in the support topic (from arcadeshopper)
Tipi.log>>
2020-11-10 19:40:18,712 TipiService : INFO physical mode enabled
2020-11-10 19:40:18,713 TipiService : INFO TIPI Ready
2020-11-10 19:40:22,983 TipiService : INFO physical mode enabled
2020-11-10 19:40:22,984 TipiService : INFO TIPI Ready
2020-11-10 19:40:31,232 TipiDisk : INFO Opcode 5 LOAD - DSK1.EDIT1
2020-11-10 19:40:31,234 Pab : INFO opcode: Load, fileType: Sequential, mode: Update, dataType: Display, recordType: Fixed, recordLength: 0, recordNumber: 8448
2020-11-10 19:40:31,235 tinames.tinames: INFO DSK1.EDIT1 -> /home/tipi/tipi_disk/EDITASS1/EDIT1
2020-11-10 19:40:31,249 TipiDisk : INFO LOAD image size 6144
2020-11-10 19:40:32,272 TipiService : INFO Request completed.
2020-11-10 19:40:36,548 TipiService : INFO physical mode enabled
2020-11-10 19:40:36,548 TipiService : INFO TIPI Ready
2020-11-10 21:31:37,857 Pab : INFO opcode: Close, fileType: Sequential, mode: Update, dataType: Display, recordType: Fixed, recordLength: 0, recordNumber: 8448
2020-11-10 21:31:37,857 tinames.tinames: INFO DSK1.ASSM1 -> /home/tipi/tipi_disk/EDITASS1/ASSM1
2020-11-10 21:31:37,858 TipiDisk : ERROR responding with error: 0
NoneType: None
2020-11-10 21:31:37,858 TipiService : INFO Request completed.
I know for a fact that ISN'T true.
I have used MULTIPLE RasPI devices - (One 4B; One 3B; and One 3B+) and all of them have had issues with just THIS version of OS (2.5).
I have run RASPIAN; RASBERRY OS; And two other (mainstream) Linux OS's on all of these ...not once was there a "black screen" on boot. And, as I've said (multiple posts) "IT RUNS FINE WITH TIPI VERSION 1.43".
So please don't tell me it is a "hardware config issue"...it is a "software issue".